help with pics
07-23-02, 11:54 PM
#5
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
#1 BAC vavle, holds idle. need it
#2, intake for BAC valve. should not be pluged! get a mini filter on there. you need it to breath.
#3 is power steering pump
#4 replaces air control vavle. emmissions. won't pass a test with out it.
#2, intake for BAC valve. should not be pluged! get a mini filter on there. you need it to breath.
#3 is power steering pump
#4 replaces air control vavle. emmissions. won't pass a test with out it.
Last edited by Scott 89t2; 07-23-02 at 11:57 PM.
Trending Topics
07-23-02, 11:58 PM
#9
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
#5. coolant line. starts at water pump in front. goes through bac valve. goes down into throttle body to stop it from freezing in cold weather. then drains back to engine underneith.
#6. one is stock. the other 2, my guess is for either hks f-con, boost gauge, or boost controler.
#7. can't see too well but looks like the coolant line for the stock turbo. your turbo looks pretty big. probably an aftermarket one that doesn't use coolant (dry center)
#6. one is stock. the other 2, my guess is for either hks f-con, boost gauge, or boost controler.
#7. can't see too well but looks like the coolant line for the stock turbo. your turbo looks pretty big. probably an aftermarket one that doesn't use coolant (dry center)
Last edited by Scott 89t2; 07-24-02 at 12:01 AM.
Thread
Thread Starter
Forum
Replies
Last Post