Help!!! No power!!!
#1
N/A ALL DAY!!!
Thread Starter
iTrader: (1)
Join Date: Jul 2011
Location: Stratford CT
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Help!!! No power!!!
so last night i removed all ac part. now i have now power when i turn key but lights all work. the only wire that got removed went to ac pump and to a sensor
any help would be great
any help would be great
#2
Moderator
iTrader: (1)
There is a black connector which mates two black cables located about a foot below the engine fuse box. This connector takes voltage from the main fuse and powers the ignition switch. You likely disrupted this connection. If it's not making a proper connection then you would have constant battery voltage on one side of the connector but not the other side.
#3
N/A ALL DAY!!!
Thread Starter
iTrader: (1)
Join Date: Jul 2011
Location: Stratford CT
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
well thank you satch!!! i figured it was something as stupid as a loose connector below the main fuse box. i was scratching my head and checking mail on phone saw your post. then went over to my fuse box and made sure all connections were tight. found it and thank you again for your time
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM