Ok i know im going to get flamed for this but i have a 87 n/a rx-7 and i wanna turbo it now i have a turbo motor that came from another 87 rx7 along with tranny and ecu i also have turbo rear end now my question is will this all bolt into my n/a chassis or will there have to be mods made and also is there anything else i would need for this swap

 

Sounds like you've got everything ya need. You do have the s4 turbo wiring harness as well correct? And yea, it will all bolt up, the only thing I'm suspicious of is the cross member for the transmission. Make sure that you have a turbo slave cylinder as well.

 

Need maf and pressure sensor to match the ECU as well.

Also, be aware that Jspec ecu's do not always work on US spec cars. No one seems to know why.

Good Luck!

 

ok Great Thanks Guys so

Turbo slave

maf

And Pressure Sensor