Help me make a good drift wishlist!
a 2-way LSD, and some good adjustable suspension.
I'm going with the tien drift specs, and a cusco 2-way LSD as for my engine, im keeping it N/A for now and doping the normal work you'd see one a N/A. rebuild, exhaust, and intake.
right now my drifting is on uber loose back struts, tight fronts, and a stock S$ with 156k miles on it. not exactly a mosnter, but i can pull off some smal corners.
I'm going with the tien drift specs, and a cusco 2-way LSD as for my engine, im keeping it N/A for now and doping the normal work you'd see one a N/A. rebuild, exhaust, and intake.
right now my drifting is on uber loose back struts, tight fronts, and a stock S$ with 156k miles on it. not exactly a mosnter, but i can pull off some smal corners.
Lives on the Forum
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Originally Posted by xzyras
Will the tires rub with the spacers? Stock offset? Im not sure what offset I have. Not expensive rims, well kinda there just Konig's and Enkei's, 17's.
You're increasing the steering angle, so the wheels will turn more at lock-to-lock.
You cannot run stock offset wheels and expect them to not hit anything at full lock-to-lock.
We're running cheap-*** wheels from Summit Racing that were available in 16" x 8", -6 offset for $99 each!
-Ted
amu body actually have pictures of this being done or can someone take pics of it finished. What do you buy just plain ol washers or what. I wish someone would do a write up on this.
Originally Posted by RETed
Completely safe.
Talk to mazdied about this, cause he always goes to the limit with this ****.
He said absolute max is 0.300", so that's why I keep quoting 1/4", which is 0.250" which is (obviously) slightly less than the 0.300" max.
We've done this with out 20B drift FC, and with Yokohama Advan A032R stickies 225 / 50 / 16 up front, we've never had a problem with the steering failing.
We flail this car on the track!
-Ted
Talk to mazdied about this, cause he always goes to the limit with this ****.
He said absolute max is 0.300", so that's why I keep quoting 1/4", which is 0.250" which is (obviously) slightly less than the 0.300" max.
We've done this with out 20B drift FC, and with Yokohama Advan A032R stickies 225 / 50 / 16 up front, we've never had a problem with the steering failing.
We flail this car on the track!
-Ted
Originally Posted by reatrdedspleen
Im lookin to have about 8grand to spend on this car. The things i have already planned are as followed:
1. 13bt and full RHD swap.
2. Full rebuild and streetport
3. I wanna be able to push max 25psi
1. 13bt and full RHD swap.
2. Full rebuild and streetport
3. I wanna be able to push max 25psi
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM
