Help me find the size bolt/nut? chamber/TMIC
Thread Starter
Full Member
Joined: Feb 2022
Posts: 80
Likes: 3
From: moreno valley
Help me find the size bolt/nut? chamber/TMIC
Ive lost 4 bolts that mount the factor TMIC. anybody have the sizes?
Also the bolts &nuts that mount the dynamic chamber M12 X 1.25 is this correct??
Also the bolts &nuts that mount the dynamic chamber M12 X 1.25 is this correct??
Joined: Mar 2001
Posts: 31,857
Likes: 3,243
From: https://www2.mazda.com/en/100th/
the intercooler bolts are all M8x1.25x35mm long, part number was 9079-40-835
the intake nuts are M8x1.25 they have a little washer and its flat on the bottom part number is 9994-00-801
the bolt is 9980-00-8115, which is M8x1.25x115mm long
keep in mind Mazda uses JIS spec bolts, so an M8 bolt has a 12mm hex head
the intake nuts are M8x1.25 they have a little washer and its flat on the bottom part number is 9994-00-801
the bolt is 9980-00-8115, which is M8x1.25x115mm long
keep in mind Mazda uses JIS spec bolts, so an M8 bolt has a 12mm hex head
Thread
Thread Starter
Forum
Replies
Last Post
beefhole
2nd Generation Specific (1986-1992)
4
Jun 16, 2013 01:34 PM
93bbr1
3rd Generation Specific (1993-2002)
1
Dec 29, 2011 07:30 PM