So I ordered some 800cc injectors for my 88 t2, off ebay and yep they were the venom injectors. They sent me the wrong ones and some how I had a feeling. Did some research and 86-87.5 were low impedence with a center tab line and 87.5+ were highs with an offset tab line. I know I need a 10 ohm resistor but what wires do I need to splice into. Any help would be great and thanks for your time.

 

you splice into the wires comming out of the ecu. @ the ECU
far left side
top row with notches is primarys point 1 is injector p2 2nd to right is P1
below that far left is secondaries s2 and s1 to the right
see FSM electrical diagrams

 

Kool thanks man.