Ok I am trying to pull out the engine harness and I cant make any head way at all. I have everything unhooked as far as i know. And it simply will not move at all. Im trying not to destroy it if i can but is there some reason why yit wouldnt move at all.

 

which way are you trying to pull it? back through the firewall? also, which harness are you talking about?

-bill

 

yeah are you trying to remove the harness from the motor with the motor still in the car or removed??

and where is it sticking???

 

I am trying to remove the engine harness, and the engine is already out of the car. I have the harness unplugged from the ecu and it seems to be stuck in the grommet on the fire wall or is there another connector I am missing.

 

the harness is attached to the grommit... the grommit and harness come out together

 

ahh the archives didnt say that unless I missed it. Is there a right and wrong way to take it out without hurting it

 

There are more plugs on the emissions harness besides the two that go to the ECU. Disconnect all the connectors before pulling on the emissions harness.

 

Yep, check out kevins writeup at http://www.rotaryresurrection.com/ro.../engremov.html
It lists all the connectors