Help with Door Removal?
#1
Junior Member
Thread Starter
Join Date: Feb 2001
Location: Cali
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Help with Door Removal?
Hi, I am attempting to remove my drivers side door and was wondering if anyone could offer any advice. I have a couple questions.
The first is how do you remove the pin that holds the thin metal lever that slides between the door and the jam? I already disconnected both the upper and the lower hinge so all that is left now is that thin metal sliding lever. The pin is actually really bent out of shape so i'm not too sure how to disconnect it.
Secondly, what is the easiest way to disconnect the wiring? Does the wire harness detatch from inside the door or inside the car? I don't want to have to cut it if I do not have too. Thanks in advance.
e7
The first is how do you remove the pin that holds the thin metal lever that slides between the door and the jam? I already disconnected both the upper and the lower hinge so all that is left now is that thin metal sliding lever. The pin is actually really bent out of shape so i'm not too sure how to disconnect it.
Secondly, what is the easiest way to disconnect the wiring? Does the wire harness detatch from inside the door or inside the car? I don't want to have to cut it if I do not have too. Thanks in advance.
e7
#2
Former Moderator. RIP Icemark.
The harness unplugs in the drivers kick panel, then you will need to pop iy out of the retainers in the body.
The pin, just is pounded upwards
The pin, just is pounded upwards
#3
GET OFF MY LAWN
iTrader: (1)
That pin should just pop out if its not too boogered up. Tap it up with something, if it can't go up because its to bent, try visegrips and twist it is you hit the grips up or the pin up. If that doesn't work just masacre it somehow to get it out. I think the wiring has a connector behind the kick panel in the car if you don't see one in the door.
#4
Junior Member
Thread Starter
Join Date: Feb 2001
Location: Cali
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the help. the wiring im sure shouldnt be a problem once i get underneath the kick panel. the pin might give me a little problem but thanks for the advice.
Thread
Thread Starter
Forum
Replies
Last Post
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM