2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Help! Differential bushing!!

Thread Tools
 
Search this Thread
 
Old Dec 1, 2003 | 10:52 PM
  #1  
eyecandy's Avatar
Thread Starter
Rotary Freak
Tenured Member: 20 Years
iTrader: (19)
 
Joined: Sep 2002
Posts: 2,928
Likes: 1
From: Pittsburgh,PA
Help! Differential bushing!!

I am reinstalling my rear subframe and I cannot remember which way and where the diff bushings mount. They are the two that have teeth or bumps on them.
Reply
Old Dec 2, 2003 | 08:08 AM
  #2  
Rxmfn7's Avatar
Do a barrel roll!
Tenured Member 20 Years
iTrader: (4)
 
Joined: Oct 2001
Posts: 7,529
Likes: 2
From: Lower Burrell, PA
The diff goes up onto the studs, then the cups with the "teeth" go on, teeth facing up. Then the 17mm nut.
Reply
Old Dec 2, 2003 | 01:23 PM
  #3  
eyecandy's Avatar
Thread Starter
Rotary Freak
Tenured Member: 20 Years
iTrader: (19)
 
Joined: Sep 2002
Posts: 2,928
Likes: 1
From: Pittsburgh,PA
So the diff will be flush with the bottom of the car, and the cup w/teeth will between the diff and the nut, with the teeth up.. Correct?
Reply
Old Dec 2, 2003 | 01:37 PM
  #4  
nillahcaz's Avatar
you are missed
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Dec 2001
Posts: 987
Likes: 1
From: St. Louis
yep. thats it.
thank god this is all you need.. i had to replace the dif mounts that are pressed in. boy was that fun
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MILOS7
3rd Generation Specific (1993-2002)
6
May 9, 2016 06:39 AM




All times are GMT -5. The time now is 09:31 AM.