Help with buying rx7
#1
Junior Member
Thread Starter
Join Date: Aug 2008
Location: Sacramento
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Help with buying rx7
Hi i'm new here and dont know if this was covered already, if it was please lock this thread and feel free to point out the obvious. Well i'm about to be buying my first ever FC and i would like some help from people that know what they are doing. I had an rx8 before so i know a little bit about the rotary engine. So detail about the car as follows: its a 1988 rx7 convertible, it has a rebuilt engine with 50K on it, everything on it is good except the top needs to be replaced and window switches as well. So what to look for when purchasing this car? any tell tale signs of a bad purchase? How hard is it to replace the top because this one has a tear on it and how expensive are tops? Alright thats all so let me here your feedback please.
#2
Junior Member
Join Date: Nov 2006
Location: Austin, Tx
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
How to buy an RX7
FCvert1, Welcome to the RX7 world. Aaron Cake has a good tutorial on buying RX7s both NA's and Turbo's. Use the attached link. and good luck!
http://www.aaroncake.net/rx-7/buy1.htm
http://www.aaroncake.net/rx-7/buy1.htm
#3
Junior Member
Thread Starter
Join Date: Aug 2008
Location: Sacramento
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
FCvert1, Welcome to the RX7 world. Aaron Cake has a good tutorial on buying RX7s both NA's and Turbo's. Use the attached link. and good luck!
http://www.aaroncake.net/rx-7/buy1.htm
http://www.aaroncake.net/rx-7/buy1.htm
Thread
Thread Starter
Forum
Replies
Last Post
FDNewbie
3rd Generation Specific (1993-2002)
161
09-06-15 11:10 AM