2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

help!!!!

Thread Tools
 
Search this Thread
 
Old 02-11-02, 01:35 AM
  #1  
Full Member

Thread Starter
 
chubbrx7's Avatar
 
Join Date: Jan 2002
Location: arizona
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
help!!!!

after weeks of trying to get my 86 rx7 to start i finally got it started, but their is three questions that i still have (1)during the weeks of cranking my engine the starter went out, so i had my friend push me with his car to get my 7 started, when i put my starter in will it start like it is suppose to or will i have to push it all the time.(2) my oil pressure is very low , it never goes above 30 on the guageand there is plenty of oil in there, dont see any leaks(3) When i rev the engine from outside the car i hear a pinging sound coming from the passenger side, sounds like its coming from inside the exhaust manifold or the passenger side of the engine.

by the way i have done all the things like the atf trick,help!

thanx for all you guys help
Old 02-11-02, 01:57 AM
  #2  
Rock Star.... almost

 
flying taco's Avatar
 
Join Date: Apr 2001
Location: Cincinasty
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
If u put a new starter in you won't need to push start your car... check your oil pressure sensor... and i really have no idea about the pinging.

Aaron
Old 02-11-02, 02:42 AM
  #3  
Full Member

Thread Starter
 
chubbrx7's Avatar
 
Join Date: Jan 2002
Location: arizona
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
the only reason that i had to push start it was because it would not start by cranking it(the car had been sittin for a while and would not start even after the atf and new plugs)
Old 02-12-02, 02:56 AM
  #4  
Full Member

Thread Starter
 
chubbrx7's Avatar
 
Join Date: Jan 2002
Location: arizona
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
can some one help plz!!!
Old 02-14-02, 06:17 AM
  #5  
Full Member

Thread Starter
 
chubbrx7's Avatar
 
Join Date: Jan 2002
Location: arizona
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
can anyone help me with these problems, i want to drive this car
Old 02-14-02, 06:31 AM
  #6  
Greek Power

 
The Ace's Avatar
 
Join Date: Aug 2001
Location: Greece
Posts: 2,375
Likes: 0
Received 0 Likes on 0 Posts
1) New starter -> you dont have to push-start the car
2) Oil pressure: if there is enough oil (i.e dipstick to the max), then check the pump (take off -very fast - an oil line to see if oil circulates. The pressure rises only when you are on the pedal, not at idle
3) Pinging sound ? no clue whatsoever. Maybe something got unscrewed ? Or loose ?
Old 02-14-02, 08:26 AM
  #7  
Alcohol Fueled!

iTrader: (2)
 
J-Rat's Avatar
 
Join Date: Jan 2002
Location: Hood River oregon
Posts: 11,093
Likes: 0
Received 2 Likes on 2 Posts
Hey

Chubbrx, have you checked your PMs? And do you have AIM more MSM? I put my number in your PM box...If you want to call, I can hopefully help you.

Rat
Old 02-14-02, 11:57 PM
  #8  
Full Member

Thread Starter
 
chubbrx7's Avatar
 
Join Date: Jan 2002
Location: arizona
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
thanx for the response, what does AIM and MSM mean???
Old 02-15-02, 08:23 AM
  #9  
Alcohol Fueled!

iTrader: (2)
 
J-Rat's Avatar
 
Join Date: Jan 2002
Location: Hood River oregon
Posts: 11,093
Likes: 0
Received 2 Likes on 2 Posts
AIM is Aol Instant Messenger. MSM is Microsoft messenger. Sometimes its easier to chat in order to help you with your problem.
Old 02-15-02, 12:12 PM
  #10  
Full Member

Thread Starter
 
chubbrx7's Avatar
 
Join Date: Jan 2002
Location: arizona
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
no i dont think i have either of those i use quest as my internet provider- anyways i have your # and i am going to call you but i have to get a calling card since it is long distance for me-i am going to find a starter today , if my car starts by pushing it should it start when i put my new starter in




All times are GMT -5. The time now is 08:39 PM.