2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

heater core?

Thread Tools
 
Search this Thread
 
Old 04-02-08, 08:56 PM
  #1  
Senior Member

Thread Starter
 
bboyclo's Avatar
 
Join Date: Mar 2007
Location: Redmond, WA
Posts: 409
Likes: 0
Received 2 Likes on 1 Post
heater core?

I've been searching but cant really find the answer i'm looking for....My question is this, what exactly is the function of the heater core and will a 87 GXL run fine w/o one or does it need it to be running good?
Old 04-02-08, 09:04 PM
  #2  
Senior Member

iTrader: (1)
 
Join Date: Oct 2002
Location: California & Florida
Posts: 674
Received 1 Like on 1 Post
The heater core is an extra radiator with a fan that heats the interior. It can be bypassed... I crumpled one of the through the firewall fittings when swapping engines & used a 2 ft. piece of conduit & some clamps to bypass it. I get a low coolant alarm for about 2 minutes after cold start but then the alarm goes out & the engine is cooled normally. I will fix it when I swap motors again after rebuilding my original engine core. If you bypass the heater core your heat & warm defrost climate controls will not function at all.

Ramses666
Old 04-02-08, 09:37 PM
  #3  
Senior Member

Thread Starter
 
bboyclo's Avatar
 
Join Date: Mar 2007
Location: Redmond, WA
Posts: 409
Likes: 0
Received 2 Likes on 1 Post
hmm...cuz sum1 selling me a car and he said that the previous owner took the heater core out and that the car has a koyo radiator? so would it be fine if it didnt have one? If i didnt care if the car had a heater or not
Old 04-02-08, 09:42 PM
  #4  
Senior Member

iTrader: (1)
 
Join Date: Oct 2002
Location: California & Florida
Posts: 674
Received 1 Like on 1 Post
Sure it would be ok if you can handle no heat.

Ramses666
Old 04-02-08, 11:15 PM
  #5  
The noob who could

iTrader: (2)
 
LogicFoxX's Avatar
 
Join Date: Jul 2007
Location: Tacoma
Posts: 204
Likes: 0
Received 0 Likes on 0 Posts
Mine was bypassed when i got it, heater hoses were disconnected, and like any novice I reconnected them and had coolant all over my floor
Old 04-02-08, 11:20 PM
  #6  
roTAR needz fundZ

iTrader: (1)
 
Join Date: Aug 2002
Location: Freeland, MI
Posts: 2,614
Likes: 0
Received 31 Likes on 31 Posts
no offense, but you kind've owned yourself on that one
Old 04-02-08, 11:27 PM
  #7  
The noob who could

iTrader: (2)
 
LogicFoxX's Avatar
 
Join Date: Jul 2007
Location: Tacoma
Posts: 204
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by lduley
no offense, but you kind've owned yourself on that one
Lol, I do that a lot it seems.
Old 04-03-08, 02:00 AM
  #8  
Senior Member

Thread Starter
 
bboyclo's Avatar
 
Join Date: Mar 2007
Location: Redmond, WA
Posts: 409
Likes: 0
Received 2 Likes on 1 Post
ok thanks guys
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM



Quick Reply: heater core?



All times are GMT -5. The time now is 06:34 AM.