2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Having probs with my T2

Thread Tools
 
Search this Thread
 
Old 10-09-02, 05:36 PM
  #1  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
Having probs with my T2

ok i finally got my T2 running enough to make some adjustments. mods are full RBexhaust downpipe FCD and no air pump . most of the time i try to accelerate quckly i get breakup that feels like fuel cut. but i doubt it becuase of the FCD. im boosting to about 30 on the stock guage. i know i have dirty injectors and an exhaust leak. the car sat for over 2 years and was started about once a month or so. could it be fuel cut or would the injectors be casuing it? i changed the oil coolant plugs and fuel filter. when i changed the fuel filter the gas that came out was a milky yellow. probably not a good sign. i've run through about 2 tanks of gas and put in a bottle of fuel injector cleaner in this tank.i also setup a water injection (instead of ATF) and suck down about 1.5 gallons of water. it seemed to run alot better after that. it is alos smoking a little bit after a hard run. nothing too bad but enough to see/smell it. that's all i can think of for now but im sure they'll be more later
Old 10-09-02, 05:37 PM
  #2  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
i've also already checked for codes and set the TPS
Old 10-09-02, 05:54 PM
  #3  
New Project on the Way...

iTrader: (2)
 
jreynish's Avatar
 
Join Date: Apr 2002
Location: Yellowknife, NT
Posts: 3,763
Received 4 Likes on 4 Posts
the smoke thing was the same with me it was a side seal then turned to an apex seal after hitting feul cut!!!! which sux ***! So i woul get that verified with a compression test!
Old 10-09-02, 06:10 PM
  #4  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
did u hit fuel cut with or without an FCD? also at what psi would u hit boost cut with an FCD? i am planning on getting a s-afc soon
Old 10-09-02, 06:18 PM
  #5  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
also when i step on the gas hard there is a hesitation (worst in first gear) where it actually take a second for the car to acclerate
Old 10-09-02, 07:20 PM
  #6  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
come on guys someone has to know something
Old 10-09-02, 09:17 PM
  #7  
...

 
Ryde _Or_Die's Avatar
 
Join Date: Aug 2001
Location: Tampa, FL
Posts: 7,539
Likes: 0
Received 0 Likes on 0 Posts
Ok if you hit fuel cut I believe yhou won't have to question anyone about it. Its been said to be like hitting a wall.

Now don't go by your stock boost gauge. You need to get an aftermarket one to be sure. And if you know your injectors are dirty, you might as well pull them and have them professionally cleaned. Sounds to me like it could be the plug wires. How old are they?
Old 10-09-02, 09:35 PM
  #8  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
not sure about age on plug wires. there a re in ok shape. i got new ones i am putting in this weekend
Old 10-09-02, 09:37 PM
  #9  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
not sure about age of plug wires. they don't look too bad. i got another set that is going in this weekend
Old 10-09-02, 09:47 PM
  #10  
EIT

 
gsracer's Avatar
 
Join Date: Jan 2002
Location: Austin, TX
Posts: 1,790
Likes: 0
Received 0 Likes on 0 Posts
get an aftermarket boost guage!

I didn't notice a walbro255 fuel pump in that list of mods with full exhuast. You're playing with fire. Get a fuel pump really soon. EGT guage would be smart too so you can actually get an idea of your a/f ratio
Old 10-09-02, 10:13 PM
  #11  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
right now im trying to stay off boost. i don't drive very far to get to work and home. when i out in the new injectors im putting in 550 and 720 and a fuel pump. once i do that how do i stop the ecu from hitting fuel cut no matter what (not going nuts just don't want to have to worry about it. i am going to be running a s-afc before too long
Old 10-10-02, 08:24 AM
  #12  
...

 
Ryde _Or_Die's Avatar
 
Join Date: Aug 2001
Location: Tampa, FL
Posts: 7,539
Likes: 0
Received 0 Likes on 0 Posts
If you have a properly working and installed FCD you won't hit fuel cut at all. Might be worth the $100 to get a new one and the sell the old one if you find out its good.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM
DavidZ
3rd Generation Specific (1993-2002)
2
12-15-01 09:30 AM
BadAssRX-7
1st Generation Specific (1979-1985)
3
08-26-01 09:51 PM
Dan
3rd Gen Archives
1
08-22-01 03:22 PM



Quick Reply: Having probs with my T2



All times are GMT -5. The time now is 08:08 PM.