2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

hatch doesnt open by its self, how do i fix that?

Thread Tools
 
Search this Thread
 
Old 07-04-05, 11:17 PM
  #1  
I "lost" my emissions....

Thread Starter
 
DREYKO's Avatar
 
Join Date: Apr 2005
Location: lillington, nc
Posts: 1,764
Likes: 0
Received 3 Likes on 3 Posts
hatch doesnt open by its self, how do i fix that?

its like the hydralic system or whatever has givin up on me, every now and then it'll do it but rarely. also the right lock only opens if i open the hatch with the key, the hatch lever wont open it it unlocks the left side but not the right? how can i fix that?
thx-
Old 07-04-05, 11:19 PM
  #2  
pistons=teh suck

 
sectachrome's Avatar
 
Join Date: May 2003
Location: NJ
Posts: 933
Likes: 0
Received 0 Likes on 0 Posts
the hatch shocks are pooped. mazdatrix has replacements.

no idea about your lock problem.
Old 07-04-05, 11:46 PM
  #3  
Rotary Enthusiast

 
jono20's Avatar
 
Join Date: May 2005
Location: Vernon, BC
Posts: 1,135
Likes: 0
Received 0 Likes on 0 Posts
TRY LUBING UP THE LATCHES ON THAT STICKY SIDE, IT MIGHT JSUT BE JAMMING A BIT. AND YEH YOU NEED NEW PUSH ROD THINGS TO KEEP THE HEATCH OFF

ahh sry about caps. too lazy to correect it all
Old 07-06-05, 01:24 AM
  #4  
Junior Member

 
SBFC3SGTU's Avatar
 
Join Date: Nov 2003
Location: Hollywood CA
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
the locks are adjustable if you take the carpeting down and remove those plastic covers i thiner there is a cable that is adjustable or something its been a year since i got my car and had to do it but they are adjustable and you can get them to open at the same time if you play around with it.
Old 07-06-05, 08:36 AM
  #5  
Senior Member

 
nopistons's Avatar
 
Join Date: Oct 2001
Location: new jersey
Posts: 691
Likes: 0
Received 0 Likes on 0 Posts
My cable ('88 SE) wasn't adjustable, but it had slack in it that was causing the same kind of problem. What I did to take up the slack was to cut a piece of brake line/tube about an inch long, cut a lenght-wise slot in it, and slid it over the cable at its end where it makes contact with the locking mechanism/release. You need to estimate the amount of slack in the cable, and cut the tubing to that length. After you've got it working, crimp the tubing closed where you cut the slot so it won't pop off.
Old 07-06-05, 09:06 AM
  #6  
Senior Member

 
kick7ca's Avatar
 
Join Date: Apr 2003
Location: Windsor Ontario Canada
Posts: 348
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by sectachrome
the hatch shocks are pooped. mazdatrix has replacements.

Are you sure about that?? I thought they only had hatch shocks for 1st gens.
Old 07-06-05, 09:24 AM
  #7  
meh

 
oakback's Avatar
 
Join Date: Sep 2002
Location: Tallahassee
Posts: 801
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by kick7ca
Are you sure about that?? I thought they only had hatch shocks for 1st gens.
You could just look at their site and see for yourself. They do have them, for $107.11 each (without the lights on them).
Old 07-06-05, 11:32 AM
  #8  
Senior Member

 
kick7ca's Avatar
 
Join Date: Apr 2003
Location: Windsor Ontario Canada
Posts: 348
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Gatlin
You could just look at their site and see for yourself. They do have them, for $107.11 each (without the lights on them).
I could do that, but I'd rather you respond with a price.
Old 07-06-05, 10:01 PM
  #9  
Full Member

 
REnoob's Avatar
 
Join Date: May 2005
Location: Cortland OH
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
wow thats expensive, i went to a junkyard (mine where bent) and lubed them with some white lithium greese and then installed after a few opens the hatch goes all the way up.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Clacor
Single Turbo RX-7's
19
09-11-15 08:36 PM



Quick Reply: hatch doesnt open by its self, how do i fix that?



All times are GMT -5. The time now is 01:35 AM.