2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

hatch back question

Thread Tools
 
Search this Thread
 
Old Oct 8, 2002 | 06:40 PM
  #1  
darkhawkrx7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 16
Likes: 0
From: ohio
hatch back question

on my 88 rx7 gtu, when i pop the trunk it doesnt move at all. i have to almost pry it open. anyone ever have this problem? know how to fix it?
Reply
Old Oct 8, 2002 | 07:14 PM
  #2  
silverrotor's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Mar 2002
Posts: 7,592
Likes: 5
From: Toronto, Corporate Canada
Whats the condition of the Struts? Usually they will spring a little bit when you release the trunk latch or open It with a key thus allowing you to get under the hatch to lift It up.
Reply
Old Oct 9, 2002 | 02:00 AM
  #3  
darkhawkrx7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 16
Likes: 0
From: ohio
it only springs 1 mm if that it sucks
Reply
Old Oct 9, 2002 | 02:22 AM
  #4  
Scott 89t2's Avatar
SOLD THE RX-7!
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 7,451
Likes: 0
From: Vancouver, BC, Canada
it should fully open all the way without touching it. mine goes half way or so
Reply
Old Oct 9, 2002 | 10:47 AM
  #5  
silverrotor's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Mar 2002
Posts: 7,592
Likes: 5
From: Toronto, Corporate Canada
Not mine. Even after replacing them with S5's from the Interior I acquired aswell.
Reply
Old Oct 9, 2002 | 11:06 AM
  #6  
wpgrexx's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Dec 2001
Posts: 1,350
Likes: 0
From: not in winterpeg anymore
it should go all the way up
Reply
Old Oct 9, 2002 | 11:38 AM
  #7  
autocrash's Avatar
Now with more 1st Gen!
Tenured Member 15 Years
 
Joined: Dec 2001
Posts: 1,534
Likes: 0
From: Ottawa
mine does, but only after I raise it partially, when it pops it only pops up a few mm, then I reach and lift it, then it goes all the way up...
Reply
Old Oct 9, 2002 | 01:27 PM
  #8  
darkhawkrx7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 16
Likes: 0
From: ohio
mine doesnt even do that what the heck
Reply
Old Oct 9, 2002 | 01:39 PM
  #9  
OC_'s Avatar
OC_
I'm bastardizing my car!
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 1,258
Likes: 0
From: Naperville, IL.
it very common for those to ware out. They sell replacements at you local auto supply store.
Reply
Old Oct 9, 2002 | 01:46 PM
  #10  
darkhawkrx7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 16
Likes: 0
From: ohio
is it the struts? because they stay where you put them they arnt lax or anything
Reply
Old Oct 9, 2002 | 01:50 PM
  #11  
DaleClark's Avatar
RX-7 Bad Ass
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (56)
 
Joined: Jan 2002
Posts: 15,622
Likes: 2,724
From: Pensacola, FL
That's what the rear wiper is for - it's a handle .

Think about it - it's a simple mechanical problem. Either the shocks don't have enough gumption to shove the hatch open, the hinges are gummed up, or the release latches are gummed up.

Dale
Reply
Old Oct 9, 2002 | 03:45 PM
  #12  
darkhawkrx7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 16
Likes: 0
From: ohio
i think it is the release hatches. i looked at them and there is a latch that is sposed to move and it doesnt
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hotshot2014
New Member RX-7 Technical
8
Jul 18, 2017 02:30 PM
highspeedrider
New Member RX-7 Technical
3
Sep 8, 2015 07:55 PM
freq
2nd Generation Specific (1986-1992)
5
Aug 22, 2015 06:46 PM




All times are GMT -5. The time now is 12:04 PM.