GLHS

http://www.russty.net/russell/pix/port%20job/done.jpg

http://www.russty.net/russell/pix/po...ort%20done.JPG

http://www.russty.net/russell/pix/po...b/100_0053.JPG

http://www.russty.net/russell/pix/po...b/template.jpg


Please feel free to post any comments these pictures bring to mind..Please be as open as possible...

Thanks...

Node

iTrader: (1)

lmfao, marker!

and yeah, thats the worst port job ive ever seen


yours?

Roy James

smoke a J and calm down before you grind that bitch. You're shaking like a motha on that port, let her flow. Assuming you did the porting.

Kanaida

ouch... That looks more damaging than beneficial... take that to a machine shop....

-Kanaida

silverrotor

iTrader: (1)

Did you have a role In this? Was It sent out to be hacked?

silverFC

ohhhh my god !!!
i hope that hes not putting that together

Felix Wankel

That looks like Sorrow's car. Wouldn't surprise me a bit.

Kurgan

eat some xanax, then finish it

SoRRoW

Them are step 1 port jobs and yes they are mine,

It is a permanat market so I know the porting area,I remakred it after I was done to show others how big the port got.

I can either use a free market or use the special dye thats about $5.-$15. you tell me.

Untill you show me something you port..or when ever you learn how to rebuild an engine then dont talk **** Levi,Your on my **** so bad you dug up porting pics of my cause yoru wondering wtf you willbe running up on,

Dont let your stupidity and curiosity get you confused.

SoRRoW

Yep ..here was my set up I ran my best time of 15.3 on stock ports.My interior still legally safe,not that hillbilly **** removing headlight motors,removing all braces.Then run a whooping
1. 15.73@91.49
2. 15.30@93.06

Levi your lame as ****,Do you think posting these pics ment ****?I posted them here like 3 weeks ago,Dumb ***..lol

https://www.rx7club.com/forum/showth...hreadid=169717

TurboII RudeBoy

If GLHS is who i think he is,buddy with a blue mp3 ,he's a smart one.talkin bout my car has leaking housings butyet i have perfect idle oil pressure,and considering he said my friends motor is a junkyard motor becuase he had yellow markings on the intercooler..he didn't even look for an egr, dummy. fc3s.org marks they're motos with yellow marker buddy.ask dave gibson.o i love the dumb. hey sorrow more power to ya ,what ever makes u better at something (trial and error )never hurt anyone.

BlackRx7

my friend has seen port jobs that look like jack O laterns and the cars still make more power than befor

SoRRoW

Hey thanks,Yeah GLHS/ Is Levi (Mr Wankle)
See heres the difrence between me and him,I know how it is to port and engine (this is my third) and getting better* Instead of wondering how it feels to port one and have to look at some ones work and critize someones engine work,and dont even know how to do it his self.

I have about $900. ish in my car and 2 12A engines.I can blow one up,installe the next and wrap the car around a tree,wipe my hands and say it has been a nice 3-4 yrs owning you,now on to another.But its all good,one day he wil notice stock ports aint ****

The exhast port does look big ..its a race port/RB template.You cant take a bird eye view of the port so i took the angle shot,I will take more with my blue marker removed.

Atlease I didnt have to waste my time with exhast baffels.

von

WTF whats wrong with the porting. Looks better than mine. You will be making lots more than stock power with that trust me. Looks good

SoRRoW

Thanks Von,

I was reading your set up,You havent ran it yet? what are you expecting on it?

Levi claims to run 13s on stock ports.

But this is the same guy who said his FC weighted1900 lbs then 2300 lbs and now he claims 2,187 lbs

GLHS

I had no idea these were your pictures. Sorry for posting them. A friend sent them to me, I didn't know they were yours.

But that porting does lack much to be desired..

You wanna race my old 13B with 300,000 miles original engine all stock engine except header and cone filter with weight reductions to the car. and you want to race it with a 4 barrel ported engine, with racing beat intake and header with carpet and headlight motors " since that bothers you"..and other goodies as you put it..


Now if I recall this all started because you said you could beat my car as your car is setup currently..now its a race with this ported all modded out engine?

IDx

hahah..did you even sell your car? you basically lied through your teeth about it. The car was shot to hell when i got there and was NOT as described...i would have basically given you $ for it while you sit there with MY car and part all the ******* **** out.. atleast you could have replaced the slave cylinder.. so the clutch was functional... I mean jesus christ.. your little friends were laughing when i was driving it.. why the **** would that encourage me to buy your car...haha

SoRRoW

Dont ****** talk your **** then change the stoires around..You know they were my **** and the same"buddy' who sent them to you is probally a all motor 18 sec car,I bet your "Buddy" dont do work on his car nor knows what a rotary looks inside.Now you know I was ported,I ****** told you that I dont know how many times I have told you MY ENGINE IS APART,
Now its an excuse that im running a"modded out engine"Shoudl that matter? I dont care to run cars boosted so why should you worry about running cars that are ported?

It works 2 ways,
Dont talk the talk if you cant walk the walk.I actually dont care what you have or what you run,I can take some loses at the track,just like I can hand them out.

I dont have no problem with any of the F&F guys,Mike Jack,Lee non of them has got involved in this **** talken unless they are just saying it to you,

But You and IDX can jerk each other off,Just like IDX wants to talk that **** about
"put your money where your mouth is"
Well dont talk the **** if you cant back it up boy.

And I know hes the one who sent them to you cause I posted them on another forum and he responded to it,which I know for a ****** fact he cant do any better.

Now on your remark about about
"Now if I recall this all started because you said you could beat my car as your car is setup currently..now its a race with this ported all modded out engine?"

Well let me see,I never said I was gonna race you on my stock set up,Secondly You KNOW I was building and porting my engine right now.I have not said 1 time I would race on stock ports,and technically my engine was already ported before You started coming slick out the mouth about racing.

It dont really bother me yoru car is that gutted,cause I know I can get mine lower,or I can just put my drivetrain in my friends car and run you,would that be ok?

About 1900 lbs?Or would you want to race another kid with his ricer 12A?Hes Probally got a total of $2500. in his car,and when im done ill have probally about $1200. and should be running some nice ETs,

IDx

im done.

von

Hmmm Well my meckanic ported the engine and I rebuilt the engine myself with thier assistance. But they say it should make more than 220rwp but im skepticle for the simple fact that I dont have a stand alone. That maf will kill me. I think a normal big streetport on an I/E rx7 will make 200rwp but my car has this fat streetport said to be as big as big in volume as a bridge port on a 4port engine. Then I have tons of soporting mods like S-AFC and ported manifolds so mabey I will make 220-240rwp but that largely depends on the mafsensors limit wich people say is 200rwp flow...If that makes sense.

Im sure your friends car can hit 13.9 if he had the same mods as me ( stock ports ) and ran a standalone or carb and at 1900 lbs. I believe I was hitting 14.5s in mine 2550lbs. Shave 500lbs off and cut a .5 seconds off and your thier in a light *** 1st gen. But thats just logic if he cant show anything to you than screw him because what if his clutch was bad or his tires where bald. Saying you can do something is worthless IMO

SoRRoW

Last weigh in of my first gen was 2250.Im pretty sure it got weighed with out me ,factory is 2,345,and im hoping to loose another 150-200.Still keeping it safe,

http://www.mazdarotary.net/porting.htm

BRealistic

for the record, when I saw the pixs, I recognized them as something I saw on this forum. I don't know how anybody could post on this forum regularly and not know they came from here. And even then, if you don't know where the pixs came from, how do you post them as a finished port job- it could be a work in progress? Anywho, I hope they give you the horsepower you want sorrow, and I also believe the person that started this thread knew exactly what he was posting.

Side note- sorrow: why the white front/ black rear paint job?

SoRRoW

Sup BRealistic,

Yeah you remember when I posted them a while back right?He didnt stumble across of anything top secret,He actually knew they were mine and he just wont admit it.He did it purposly thinking it would hurt my feelings,and it didnt bother me,cause you will have people out there critizing someones work,and they cant even do it them selves.

I wonder why some of the people who posted some remarks have not responded to this thread.Who probally dont even do their own work on thier cars.I work on my own ****,and I know the port work will get me to where I want to be,with some tuning.

SoRRoW

Grrrrr....
Silver and black ...

It will be repainted soon.