2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

GRRRRRRR wont start :(

Thread Tools
 
Search this Thread
 
Old Jul 9, 2007 | 06:46 PM
  #1  
hurleysurf24's Avatar
Thread Starter
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
GRRRRRRR wont start :(

I was driving the car and then hit a speed bump maybe around 20mph and my car just died.

The engine is a fresh rebuild and everything was running great
The weird thing is that the cars headlights will turn on and light for the key right above the ignition is on.

Nothing else turns on. Not even on accessory (I had to put my top up manually and couldn't even put my windows up and it started raining).

I tried jump starting the car because I thought the battery might have miraculously lost all of its charge. No such luck. Tried jumping it and no accesories or turnover.

Only thing I can think of is that the ground from the battery to the frame fell off when I hit the bump ... any other ideas to check ?
Reply
Old Jul 9, 2007 | 06:48 PM
  #2  
hurleysurf24's Avatar
Thread Starter
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
also where is the ground located at on the frame typically for the battery ?
Reply
Old Jul 9, 2007 | 07:23 PM
  #3  
00dev's Avatar
Newbie
 
Joined: Apr 2007
Posts: 3
Likes: 0
From: Richmond,VA
I'm in the same damn boat with my 86!
except the only way I've gotten mine to start up is by spraying ingnition fuel down the butterfly valve. It starts up to 3000 rpms then dies....... keeping my foot on the gas will not help either.
I check all Vac hoses, AFM, new sprark plugs, checked fuel pressure. installed and new fuel pump (the old one wasn't working very well)

someone please provide some tips!
Reply
Old Jul 9, 2007 | 07:42 PM
  #4  
hurleysurf24's Avatar
Thread Starter
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
thats not the same problem. my problem is i am not getting any power to anything, any of my accessories or the ignition (I cant even put my windows up). please post in a nother thread for seperate problems



UPDATE 1: Checked the grounds and they seem to be just fine?I don't konw where else to go with it now. Give me s ome insight guys
Reply
Old Jul 9, 2007 | 08:21 PM
  #5  
iox106's Avatar
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Nov 2006
Posts: 97
Likes: 0
From: Deltona, FL
Have you tried push starting it.
Reply
Old Jul 9, 2007 | 08:45 PM
  #6  
AC LINKS's Avatar
Top Down and Naked...
Tenured Member 05 Years
 
Joined: Feb 2006
Posts: 1,129
Likes: 0
From: Orlando
Hey bro heres a link on all ground wires. http://www.aaroncake.net/rx-7/grounding.htm I hope it helps
Reply
Old Jul 9, 2007 | 09:25 PM
  #7  
hurleysurf24's Avatar
Thread Starter
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
hey I read that and traced the grounds .. they all look fine and are still "alive".
im going nuts here !!!
Reply
Old Jul 9, 2007 | 10:30 PM
  #8  
ColdSeven's Avatar
in between builds
Tenured Member 05 Years
 
Joined: Jul 2006
Posts: 337
Likes: 0
From: Kansas
what the hell is going on?
the other day i took my car out and was driving fine and then i parked it...went to start it an hour later and ....nothing.......noticed an oil leak coming form the oil pan...fixed that and the plugs were flooded, changed them....still won't start it's getting spark and the FP is working not sure.

all these FC's going down whats up?
Reply
Old Jul 10, 2007 | 12:57 AM
  #9  
0verb00st's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2007
Posts: 598
Likes: 0
From: Seattle Washington
this might sound stupid but check the connection to the battery (make shure everything is still securly connected and the connection is there). Also try jump starting it.
Reply
Old Jul 10, 2007 | 01:23 AM
  #10  
hurleysurf24's Avatar
Thread Starter
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
hey already tried jumping it ... and i did check the connection about thirty times .. each time secretly hoping the car would turn over sigh

i really dont know wtf is going on .. i can usually think out a problem through logic but this has me baffeled.

lights are able to go on .. but nothing else or the engine GRRRRRR
Reply
Old Jul 10, 2007 | 01:43 AM
  #11  
RyosukeD's Avatar
Yo dawg, Im happy for you
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2006
Posts: 574
Likes: 0
From: Corvallis, Oregon
My car did this a couple days ago Turned out the positive terminal on the battery had some corrosion and wasn't making a good connection. Cleaned off the terminal and it started right up.
Reply
Old Jul 10, 2007 | 01:43 AM
  #12  
zerrorx7's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Feb 2005
Posts: 166
Likes: 0
From: alberta, canada
main relay

this is mounted next to the leading coil on the body..right where your break booster is..make sure its bolted down..check make sure its not rusted and if not replace and i think it should do it..good luck
Reply
Old Jul 10, 2007 | 02:12 AM
  #13  
freemanrx7's Avatar
^Hold On
Tenured Member 10 Years
 
Joined: Mar 2007
Posts: 1,331
Likes: 1
From: eureka
My first 7

When I bought my first RX7 it just died on the way home. I mean completly dead nothing. I messed with the negative battery connection and everything came back on.

I would recommend replacing the + & - battery cables. Should be cheap to fix . Your cable could look fine on the outside but somewhere along the way there could be a missed connection. Also make sure your post's are clean.
Reply
Old Jul 10, 2007 | 09:36 AM
  #14  
chiefnobum's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Jun 2003
Posts: 434
Likes: 5
From: Regina, SK
I had the exact same thing happen to me after I had swapped engines. It turned out to be the ground wire that comes off of the main fuse block. Somehow we had missed reconnecting it. I could still turn on the headlights, but no accessories or starting. I hate to say it, but get out a voltmeter and start checking as many grounds as you can. Also, check your fuses.
Reply
Old Jul 10, 2007 | 09:40 AM
  #15  
mort2002's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (1)
 
Joined: Jul 2003
Posts: 1,248
Likes: 0
From: Prosser Washington
was your battery straped down when you hit the speed bump? sounds like you blew a fuse when you hit that speed bump, battery went up and hit bottom of hood and shorted it out, poping a fuse.. take a look at all the fused under the hood. than start on the inerior fuses...
Reply
Old Jul 10, 2007 | 10:56 AM
  #16  
hurleysurf24's Avatar
Thread Starter
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
mort ... that would explain a lot ill start looking at the fuses today.

how the hell do you pull the main fuse to check it ? .. i tried pulling it and it just doesnt want tobudge
Reply
Old Jul 10, 2007 | 11:32 AM
  #17  
AC LINKS's Avatar
Top Down and Naked...
Tenured Member 05 Years
 
Joined: Feb 2006
Posts: 1,129
Likes: 0
From: Orlando
Originally Posted by hurleysurf24
mort ... that would explain a lot ill start looking at the fuses today.

how the hell do you pull the main fuse to check it ? .. i tried pulling it and it just doesnt want tobudge
It has a nut you have to unscrew.
Reply
Old Jul 10, 2007 | 11:51 AM
  #18  
TTrashFC's Avatar
Junior Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jun 2006
Posts: 46
Likes: 0
From: California
Yeah you probably arked to the hood with the battery. Check relays and fuses for sure.
Reply
Old Jul 10, 2007 | 11:59 AM
  #19  
Spectator's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (1)
 
Joined: Aug 2005
Posts: 1,315
Likes: 0
From: Canada
Ummmm, this might sound stupid bro, but did you check your fuses?

EDIT: ok, you will....The main fuse has 2 10mm nuts on each side.....or is it 1 on one side and 2 on the other? Anyhow, grab a ratchet.
Reply
Old Jul 10, 2007 | 12:42 PM
  #20  
hurleysurf24's Avatar
Thread Starter
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
just pulled the main 80 fuse out .. that was easy lol .. its 1 and 2 nuts on each side.

anyway how to i know if its blown or not without a test light ?
Reply
Old Jul 10, 2007 | 01:53 PM
  #21  
hurleysurf24's Avatar
Thread Starter
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
fixed
Reply
Old Jul 10, 2007 | 02:01 PM
  #22  
AC LINKS's Avatar
Top Down and Naked...
Tenured Member 05 Years
 
Joined: Feb 2006
Posts: 1,129
Likes: 0
From: Orlando
Originally Posted by hurleysurf24
fixed
Great news. So it was the main?
Reply
Old Jul 10, 2007 | 02:05 PM
  #23  
hurleysurf24's Avatar
Thread Starter
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
Nope .. I did make a write up for it though
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/write-up-car-wont-start-but-still-have-power-lights-669828/
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
whinin
New Member RX-7 Technical
10
Sep 5, 2015 11:52 PM




All times are GMT -5. The time now is 10:10 AM.