2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

ground

Thread Tools
 
Search this Thread
 
Old 12-23-03, 06:59 PM
  #1  
MEAN GREEN

Thread Starter
 
IRISHMAN's Avatar
 
Join Date: Aug 2003
Location: DEERFIELD BEACH FL
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
ground

I'll have to throw the bullshit flag in on that one. The ground from the firewall next to the w/w motor will cause this problem if it is not connected or if it it fried. Mine got hot and fried and it was not getting enouph juice to the starter, i thought the starter was bad until i found that burnt wire. I replaced with 10g and it started right up and solved alot of other problems also. Put some of that wire mesh casing around it to protect it from turbo or exh man heat.
Old 12-23-03, 09:01 PM
  #2  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
If that wire is not letting the car start, then you have bigger problems, as that is a back up ground for the engine, and you have lost your main ground.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM



Quick Reply: ground



All times are GMT -5. The time now is 09:07 PM.