GReddy V-Spec Piping Question
#1
GReddy V-Spec Piping Question
The last pipe coming off the elbow has a plate or attachment point welded on It. Irregardless, I plan on cutting It off and welding on a flange for my GReddy BOV In It's place.
I have not seen It serve a purpose, although I don't know how It would be the same In Japan.
What Is It and why Is It there?
I have not seen It serve a purpose, although I don't know how It would be the same In Japan.
What Is It and why Is It there?
#4
Moderator
iTrader: (7)
Your Greddy kit is for RHD cars (japan/uk/aus market) and bracket does not fit anything i have seen on LHD's....
just cut it
This kit does fit RHD car nice without last pipe touching or hitting brake master cylinder, but in our cases its either touching or you have to modify (cut) last pipe
just cut it
This kit does fit RHD car nice without last pipe touching or hitting brake master cylinder, but in our cases its either touching or you have to modify (cut) last pipe
#5
Thats exactly what I was able to concur hIGGI.
I ended up cutting off the tab and polished my pipes to the effect of this while I was at It. https://www.rx7club.com/showthread.p...threadid=89676
Here Is what I mean. Take note It's the last pipe connecting to the elbow.
Coutesy of cymfc3s
I ended up cutting off the tab and polished my pipes to the effect of this while I was at It. https://www.rx7club.com/showthread.p...threadid=89676
Here Is what I mean. Take note It's the last pipe connecting to the elbow.
Coutesy of cymfc3s
Last edited by silverrotor; 01-24-04 at 02:02 AM.
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM