Greddy Electric boost gauge
#1
Senior Member
Thread Starter
Join Date: Oct 2003
Location: Tampa, Florida
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
Greddy Electric boost gauge
Qucik question. I'm in the process of installing the gauge. The instructions say to tee off the fuel pressure regulator hose. I was told by reliable source that if the pressure to that line is lost or reduced that the motor will run lean.
1. Is it OK to tee off the fuel pressure regulator
2. Do I need to have another vacuum source
3. Where would be the best location to attach the vacuum/boost hose, nearest the manifold without having to drill holes?
thanks for the help
lewis
1. Is it OK to tee off the fuel pressure regulator
2. Do I need to have another vacuum source
3. Where would be the best location to attach the vacuum/boost hose, nearest the manifold without having to drill holes?
thanks for the help
lewis
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,832
Received 2,603 Likes
on
1,847 Posts
i would tee it into the map sensor, or find some other source, the fpr is hard to get too
#3
Senior Member
Thread Starter
Join Date: Oct 2003
Location: Tampa, Florida
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
I can get to it finebut want to know if my info is correct
If I don't need 2 sources for (I assume vaccum/pressure)
I'll only use 1 but want it closest to the intake as possible
thanks
If I don't need 2 sources for (I assume vaccum/pressure)
I'll only use 1 but want it closest to the intake as possible
thanks
#4
Senior Member
Thread Starter
Join Date: Oct 2003
Location: Tampa, Florida
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
I can get to it finebut want to know if my info is correct
If I don't need 2 sources for (I assume vaccum/pressure)
I'll only use 1 but want it closest to the intake as possible
thanks
If I don't need 2 sources for (I assume vaccum/pressure)
I'll only use 1 but want it closest to the intake as possible
thanks
#5
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,832
Received 2,603 Likes
on
1,847 Posts
tee into the map sensor or find a dedicated plug. if the fpr line worries you dont use it
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM