I want to just use the premix in my gas. But when I looked at all the oil lines that are used to inject it into my motor, I got very confused very fast. I would like to take off as much stuff as possible, but I dotn want to mess up something with my oil. I tried looking at a few different manuals but with no luck. I tried fallowing the oil lines, but that did not help. Is there a “how to” paper somewhere out there. I don’t want to just start ripping oil lines, you know?

 

oh ya...i have an 88T2 motor

 

Let me fine my write-up

EDIT: https://www.rx7club.com/showthread.p...ght=premix+mod

This should be helpful. I should re do it with some pics but I need to have a working MOP system for that.

 

There're quite a few threads on this, check out:

https://www.rx7club.com/showthread.p...t=removing+OMP

It sounds like you'd need four bolts to plug up where the oil injectors go in, a blockoff plate for the oil metering pump, and a nipple or something to cover where the vacuum hose spider attaches to the intake.

There's lots of threads on this. Search for "OMP removal."