[D1 RX7]

had a small prang the other day. Need to remove the frontbar/nosecone. Undid all the screws, except where the frontbar connects to the fenders. I cant seem to unhook it at those sections? Any insight into how to attack those screws/lugs/simmilar?

thanks guys

josh

NZConvertible

You have to jack the front up, remove the wheels and inner liners, and go at the nuts holding the nose on from the inside of the guards.

[D1 RX7]

thanks mate appreciate it

oakback

Don't necessarily need to remove the wheels. Just take off the under-pan thing and the brake ducts, lay down and reach your arm up behind the fender. Three nuts hold it on each side. You might have to use a deep socket or a box-end wrench.