gauges On the dash Don’t work.
The fuses All check out.
What could it Be?

 

none of the guages work? uh, swap out the guage cluster and check to make sure everythings connected behind the guage cluster.

 

well they were working befor the car sat.
i did at one point Have the Bat terms Backwords because there Poorly markd. no idea if that would hurt anything

But without Switching them out is there another way to check. i dont have another Guage Cluster

 

Did you check the fuses with a multimeter? Just because they look good doesn't mean they are.

 

Well um erm .... no
blah. ok ill go check them. one moment pls

 

The Fuse Mark'd (METER) was Blown. Though i know you say to check it befor you post. But i did, with non blown.

Now the Gauges and the Warning panle Both work.
But the Next question is. i dont have 15A Fuse to Replace it right now just 30's and a 20
Would it be safe to use that Concidering the Last fuse blew?

 

Never use a bigger fuse. That's just asking for trouble.

Find the reason it was blowing in the first place and fix it.

 

ok so i know what to look for.
Possible Reasons for the fuse to blow?

 

you could look at the wiring diagrams (alldata.com) and trace it down unplugging it and seeing if it blows, if it keeps blowing that is. For now just go to a gas station and grab some fuses.

 

Lock and load... now ive got 20Bux in Multiple fuses
Thankx all

 

i had the same problem, but all the fuses checked out correctly, is there like another fuse or somthing tha i can check?

 

at this Point id say just check the METER fuse and Connection work'd for me