Gauges
Gauges
Hey guys got a question. All my gauges arent working and i have no clue what fuse it would be, but what if its not the fuse if there is one. So if some one could help me out that would be great thanks.
Meter or Room fuse.
Take a 12V test light and clip the alligator clip to a known ground (bolt or metal plate attached to body). Turn ign. switch on and back probe each side of each fuse. Note that the fuses have a little bit of uninsulated tab on each side of the number at the back. If one side lights but not another, fuse is blown.
Take a 12V test light and clip the alligator clip to a known ground (bolt or metal plate attached to body). Turn ign. switch on and back probe each side of each fuse. Note that the fuses have a little bit of uninsulated tab on each side of the number at the back. If one side lights but not another, fuse is blown.
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
kryan9
1st Generation Specific (1979-1985)
2
Sep 15, 2015 10:11 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM



