Gauge Lights
Gauge Lights
I read the faq about this but it was kind of vague,... my gauge lights do not work, none of them.. At first I thought it was a bad fuse but i checked all the fuses down by the clutch and they're all good. The taillights DO work and that's what's wierd, i thought maybe the bulb on the light was burned out and when i took the gauge cluster off i realised there was like 50 bulbs and none were burnt. Can someone tell me a bit more into detail on how to fix it and where the switch that they say is burned out can be located.. Thanks.
yeah check fuses with a multimeter, not your eyes.
my wipers and logicon didnt work for like 6 months. tried everything. turned out to be a hairline crack on the "cigar" fuse. I always take a resistance and continuity rating on fuses now
my wipers and logicon didnt work for like 6 months. tried everything. turned out to be a hairline crack on the "cigar" fuse. I always take a resistance and continuity rating on fuses now
what part of this was not clear???:
says pretty clear that you need to check the back of the light switch.... not the bulbs.
And the parking lights are on a different circuit. They do not dim up and down like the dash lights can. Why do people think they should be related???
My dash lights don't work
Did you check the dimmer control??? If you did and they still don't work the light switch connections may have burnt out. Check the back of the light switch.
Did you check the dimmer control??? If you did and they still don't work the light switch connections may have burnt out. Check the back of the light switch.
And the parking lights are on a different circuit. They do not dim up and down like the dash lights can. Why do people think they should be related???
Thread
Thread Starter
Forum
Replies
Last Post
RPOdesign
New Member RX-7 Technical
5
Aug 27, 2015 11:42 PM



