gaskets
#1
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Washington
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
gaskets
hi,
im gearing up to pull my injectors and send em to RC. In the fsm from what i can see, there's three gaskets that would be needed to be replaced. the gasket between uim-lim, the oil filler neck gasket and one under the fuel rail?
is there any other gaskets or things that needs to be replaced when i put the injectors back in? i dont want to be putting stuff back togher and need to order some gasket and make downtime longer. thanks btw 88 turbo model fc..
im gearing up to pull my injectors and send em to RC. In the fsm from what i can see, there's three gaskets that would be needed to be replaced. the gasket between uim-lim, the oil filler neck gasket and one under the fuel rail?
is there any other gaskets or things that needs to be replaced when i put the injectors back in? i dont want to be putting stuff back togher and need to order some gasket and make downtime longer. thanks btw 88 turbo model fc..
#5
Moderator
iTrader: (1)
The O-Rings are the little ones that sit at the upper rim. It's the upper/lower Grommets that should be replaced at least once, If you haven't already.
As mentioned before, replace the O-Rings everytime you take out the FI's. Besure to lube them up before you slip them In the Rails. I use spit.
As mentioned before, replace the O-Rings everytime you take out the FI's. Besure to lube them up before you slip them In the Rails. I use spit.
Thread
Thread Starter
Forum
Replies
Last Post
matty
3rd Generation Specific (1993-2002)
40
10-06-15 09:13 PM