gaskets
hi,
im gearing up to pull my injectors and send em to RC. In the fsm from what i can see, there's three gaskets that would be needed to be replaced. the gasket between uim-lim, the oil filler neck gasket and one under the fuel rail? is there any other gaskets or things that needs to be replaced when i put the injectors back in? i dont want to be putting stuff back togher and need to order some gasket and make downtime longer. thanks btw 88 turbo model fc.. |
Anytime the injectors are pulled, replace the injector O-rings.
Also the ring gaskets under the injectors. I forget what they're called. |
And the LIM O-rings
|
S13 Slide here @ atkins rotary I have the o-rings and gaskets all in stock . you are looking about $40.00 for all the parts.
Dan |
The O-Rings are the little ones that sit at the upper rim. It's the upper/lower Grommets that should be replaced at least once, If you haven't already.
As mentioned before, replace the O-Rings everytime you take out the FI's. Besure to lube them up before you slip them In the Rails. I use spit.:) |
All times are GMT -5. The time now is 12:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands