fvvcking wow
#1
Full Member
Thread Starter
Join Date: Oct 2003
Location: arlington heights,il
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
fvvcking wow
thank you spirit-rx7 and your bootyus car http://www.teamfc3s.org/forum/member...tos&car_id=958
i am now having serious 2nd thoughts on selling my fc lol.
iiiiiii neeed to locate new ftp lenses, and new corner lenses the shizzle under the ftp. can anyone recomend a good site to pick this up from?
i also need the rear emblems. old owner took them off and now there are holes?
how are these secured? how much am im going to be spending to get these again? and from where?
Before the car was running 14 psi tuned to a 11.8 af ratio, how much should i richen it up after i get it broken in?
when in 5th gear at 30-35 when the engine kinda bogs, if i would accelerate to have it bog i would get a chirping noise, im guessing this is my throw out berring, correct?
Thanks.
i am now having serious 2nd thoughts on selling my fc lol.
iiiiiii neeed to locate new ftp lenses, and new corner lenses the shizzle under the ftp. can anyone recomend a good site to pick this up from?
i also need the rear emblems. old owner took them off and now there are holes?
how are these secured? how much am im going to be spending to get these again? and from where?
Before the car was running 14 psi tuned to a 11.8 af ratio, how much should i richen it up after i get it broken in?
when in 5th gear at 30-35 when the engine kinda bogs, if i would accelerate to have it bog i would get a chirping noise, im guessing this is my throw out berring, correct?
Thanks.
Last edited by chris1188; 03-07-06 at 12:36 AM.
#3
Full Member
Thread Starter
Join Date: Oct 2003
Location: arlington heights,il
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Icemark
For sale or wanted posts/ads belong in the For Sale/ Wanted section of the board, not here in the Technical section.
#4
Former Moderator. RIP Icemark.
No, this would be better:
Originally Posted by chris1188
rear emblems. old owner took them off and now there are holes?
how are these secured? how much am im going to be spending to get these again? and from where?
Before the car was running 14 psi tuned to a 11.8 af ratio, how much should i richen it up after i get it broken in?
when in 5th gear at 30-35 when the engine kinda bogs, if i would accelerate to have it bog i would get a chirping noise, im guessing this is my throw out berring, correct?.
how are these secured? how much am im going to be spending to get these again? and from where?
Before the car was running 14 psi tuned to a 11.8 af ratio, how much should i richen it up after i get it broken in?
when in 5th gear at 30-35 when the engine kinda bogs, if i would accelerate to have it bog i would get a chirping noise, im guessing this is my throw out berring, correct?.
#6
Full Member
Thread Starter
Join Date: Oct 2003
Location: arlington heights,il
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Icemark
No, this would be better:
and who dosnt want to see a bootyus fc?
Trending Topics
#9
Full Member
Thread Starter
Join Date: Oct 2003
Location: arlington heights,il
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
did i say anything bad about icemark? no
i came here to get some questions answered not cause a debate, i come and go on this site, and as far as i am concerend i dont see anything wrong with my post, unless some new bs rule has been put into place. I changed asking for vert rims like he requested.
i came here to get some questions answered not cause a debate, i come and go on this site, and as far as i am concerend i dont see anything wrong with my post, unless some new bs rule has been put into place. I changed asking for vert rims like he requested.
#11
Escalator now Stairs
Join Date: Oct 2004
Location: Minneapolis
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by chris1188
did i say anything bad about icemark? no
i came here to get some questions answered not cause a debate, i come and go on this site, and as far as i am concerend i dont see anything wrong with my post, unless some new bs rule has been put into place. I changed asking for vert rims like he requested.
i came here to get some questions answered not cause a debate, i come and go on this site, and as far as i am concerend i dont see anything wrong with my post, unless some new bs rule has been put into place. I changed asking for vert rims like he requested.
#14
Full Member
Thread Starter
Join Date: Oct 2003
Location: arlington heights,il
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by unek87
dont know bout your question but whats up on the info on that red fc with the lip . what lip is that of off ?
#16
Full Member
Thread Starter
Join Date: Oct 2003
Location: arlington heights,il
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fcfanatic
There is no unanswered question in your post. Which statement are you referring to?
i also need the rear emblems. old owner took them off and now there are holes?
how are these secured? how much am im going to be spending to get these again? and from where?
Before the car was running 14 psi tuned to a 11.8 af ratio, how much should i richen it up after i get it broken in?
when in 5th gear at 30-35 when the engine kinda bogs, if i would accelerate to have it bog i would get a chirping noise, im guessing this is my throw out berring, correct?
#17
Escalator now Stairs
Join Date: Oct 2004
Location: Minneapolis
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Ha, sorry man. Got way off topic there. The parts you are referring to can be had very cheaply off of the forum here. You can post a WTB(Want to Buy) Thread for your needed parts, or simply search and find a seller. I am unsure on the last 3 Q's.
#18
Moderator
iTrader: (5)
Originally Posted by chris1188
when in 5th gear at 30-35 when the engine kinda bogs, if i would accelerate to have it bog i would get a chirping noise, im guessing this is my throw out berring, correct?
#19
Full Member
Thread Starter
Join Date: Oct 2003
Location: arlington heights,il
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Funkspectrum
it depends...clutch in, it would be pilot bearing or input shaft bearing....clutch out is throwout bearing....but it would make the noise in all gears and at all speeds...
#20
Lives on the Forum
I was missing an emblem off my car when I bought it. I got a bunch of stuff off of eBay for it (replacement parts for broken/missing things, and a set of winter wheels). Anyway, the emblems are secured on with adhesive. You can try to find some specific kind of automotive badge adhesive at a body shop maybe, or just use some outdoor rated clear silicone. That's what I used and it looks fine and is still on there 2+ years later. You need to try to get the hole insets with the badge, they're these little plastic bits that fit between the holes in the body and the little pins on the back of the badge.
There's always someone parting a car out and selling bits in the for sale section, you should be able to find someone in there who has what you need, or you can look on eBay too.
There's always someone parting a car out and selling bits in the for sale section, you should be able to find someone in there who has what you need, or you can look on eBay too.
#23
Banned. I got OWNED!!!
Join Date: Nov 2002
Location: San Jose, CA
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
1. seriously do SOME work man........no more spoon feeding for you.....
2. if you seriously don't expect some bogging down at 35 mph in 5TH GEAR then i don't know what kind of low end torque you're looking for but you won't get it.
3. www.mazdatrix.com has emblems......i'd recommend you leave the car with no emblems....the fasteners are sold on the site also.
4. common sense would tell me to go dynotune the car and richen it up a bit.....
5. you're pissing me off......quit posting and start searching.
2. if you seriously don't expect some bogging down at 35 mph in 5TH GEAR then i don't know what kind of low end torque you're looking for but you won't get it.
3. www.mazdatrix.com has emblems......i'd recommend you leave the car with no emblems....the fasteners are sold on the site also.
4. common sense would tell me to go dynotune the car and richen it up a bit.....
5. you're pissing me off......quit posting and start searching.