joeylyrech

iTrader: (11)

hello guys,I want to find out if theres any tips or tricks of how to put together a fully bridgeported S5 TII motor heres a list of what already have
RA seals
OEM apex springs
solid corner seals
third gen corner seals springs
3 window bearings
solid thermal pellet
full o ring kit(teflon encapsulated and viton)
competition oil control rings
high performance oil regulator

any tips advise are welcome thanks JORGE

joeylyrech

iTrader: (11)

hello guys,I want to find out if theres any tips or tricks of how to put together a fully bridgeported S5 TII motor heres a list of what I already have
RA seals
OEM apex springs
solid corner seals
third gen corner seals springs
3 window bearings
solid thermal pellet
full o ring kit(teflon encapsulated and viton)
competition oil control rings
high performance oil regulator

any tips advise are welcome thanks JORGE

Tournapart

iTrader: (4)

learn how to shave metal REALLY well

joeylyrech

iTrader: (11)

if you mean making the ports there already done,i just need to put the motor together this is my first rebuilt without any help thats way im looking for some advice tips thanks

bobybeach

buy lots of vasaline and a box of panadol for those headaches!

Carzy Driver

go buy yourself a assembly video, Atkins is good cause it's chaep and covers the basics. Or, look into getting the DIY13B-REW DVD set, many pricey but a great set.

MaczPayne

iTrader: (5)

What would the vaseline be used for? hehehehehehehehehehe.


J/K


Yeah, get one of those rebuild videos from atkins, or RA. Get a decent torque wrench and have a list of tolerances handy. Rebuilding the engine is like..... making a sandwich...... a big.... heavy.... metal..... and perhaps thundering.... sandwich....

Aaron Cake

iTrader: (1)

Head up to the Archives and read my thread in which I put together my engine. This thread covers almost every step of the process except rotor seal assembly.

darkprince134

iTrader: (5)

ya just read arron cakes.....hes pretty much made the atkins video..but in picture form

joeylyrech

iTrader: (11)

You can also just barely see a note written in marker that says "Apex corner seal towards intermediate". This is to remind me that the corner apex piece must face the center of the engine to prevent them from falling through the eyebrow port.




i went and check Aaron writeup but im confused now,do i need to do the same thing that you did with the apex seal corner piece?so in other words you put together the apex seal backwards right.by the way guys i order the atkins video thanks for the replays att jorge

Houstonderk

iTrader: (3)

Yes if bridgeported. This was a pain in the *** for mine is all I know.

Aaron Cake

iTrader: (1)

Yes, on one housing the seal goes in backwards.

Edit...That is, both corner seals face the intermediate iron.