Full and narrow range tps?
has anyone else had a problem of the voltage dropping out for a split second during a voltage check?
as I depress the pedal the voltage goes up(on the voltmeter) and when it reaches 4.00v it drops out for a split second and keeps on going
and on the way back down it drops out at 3.7v
as I depress the pedal the voltage goes up(on the voltmeter) and when it reaches 4.00v it drops out for a split second and keeps on going
and on the way back down it drops out at 3.7v
that means you need a new tps... thats dead spot.
infinite resistance = no voltage
move the throttle, the full range is the one where it touches all the time, the narrow range stops touching after you move it a little
infinite resistance = no voltage
move the throttle, the full range is the one where it touches all the time, the narrow range stops touching after you move it a little
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
HalifaxFD
Canadian Forum
126
May 9, 2016 07:06 PM
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
Sep 11, 2015 03:29 PM




