Fuel, Water temp, and oil pressure gauges don't work
Thread Starter
Full Member
Joined: Feb 2006
Posts: 169
Likes: 0
From: Massachusetts
Fuel, Water temp, and oil pressure gauges don't work
My Fuel water temp and oil pressure gauges don't work. i Checked the meter fuse and it seems fine, I also looked behind the meter board and everything looks ok but I'm still not getting any readings from these gauges, anyone have any ideas.
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Since they are all electric Gauges,then it has to Be Electrical..Don't just Look at the Connector,jiggle the thing!..and also,For the Hell of it,replace the Meter fuse,Illumination and Room Fuses,with Fuses that you know are good..
HAILERS
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
And you checked to see if the connectors were on those items? Oil and Water senders? And if you did that, did you go to Body Electrical section of the FSM and checked the oil and water gauges out per the directions in that chapter of the FSM? It's there.
When was the last time they worked?
When was the last time they worked?
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
stickmantijuana
20B Forum
8
Aug 18, 2015 02:46 PM