Fuel Injectors Not firing
#1
King of the Loop
Thread Starter
Fuel Injectors Not firing
I am trying to start my 13b-re motor. Its getting spark, and fuel all the way up to the rail but does not turn over without started fluid and even then it only bucks til the fluid is done. The plugs are dry and dont smell like fuel. How can I test/correct whats going on?
#3
King of the Loop
Thread Starter
Originally Posted by classicauto
check the injector plugs and see if they're getting signal...
what type of injectors? what kind of management?
what type of injectors? what kind of management?
#5
King of the Loop
Thread Starter
Originally Posted by HAILERS
Pull the ECU plug off. At the plug, check for 12vdc at each of the injector wires. No 12vdc = no start. That's probably what your going to find IF all you said is true.
#6
certified nutz and boltz
Join Date: Jan 2006
Location: myrtle beach, sc
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Same thing happened to me and the fix is easy. However, everytime I mention the fix I get flamed by anyone who thinks they know electrical theory so if you're not getting +12vdc at the injectors, send me a private message and I'll tell you. ~rich
#7
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Originally Posted by BklynRX7
Which plug? at the ecu? or at the injectors? If thats the case whats the fix?
IF it were a S4, you'd pull the small plug off the ECU and turn the key to ON. Then pins 3C,E,F and H for each having 12v.
Trending Topics
#8
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
On a S5, the pins are 3z,y,x and m. The plug is a 26pin connector on a S5.
The 12v on those wires in the plug come from the Main Relay. But just before the 12v gets to the ECU plug there is a plug that connects the emissions harness to the front harness.
The 12v on those wires in the plug come from the Main Relay. But just before the 12v gets to the ECU plug there is a plug that connects the emissions harness to the front harness.
#9
given up GSL-SE TII swap
iTrader: (2)
Join Date: Sep 2004
Location: dallas, TX
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
dont help him, the motor he is trying to get help with he didnt even pay for: https://www.rx7club.com/showthread.p...=1#post5457619
************************************************** ************************************************** *******
************************************************** ************************************************** *******
#12
Drive it like ya stole it
Join Date: Feb 2006
Location: Mass
Posts: 380
Likes: 0
Received 0 Likes
on
0 Posts
That's really lame. Rip off a forum member and then come back to get help? Shame, shame! Why don't you pay the money that you owe?
Last edited by Slo Motorsports; 03-28-06 at 02:58 PM.
#14
King of the Loop
Thread Starter
Originally Posted by prjct87rx7
we have a real life hoodini on our hands...he dissapears anytime someone mentions that...lol
If you read this thread fully :
https://www.rx7club.com/showthread.p...3&page=1&pp=15
ou will see what really happened. THis ****** tried to rip me off and I was lucky enough not to lose it all.
ALso where did everyone get the idea I was selling Infini seats. I never posted that and never heard of that untill someone PM'd me asking about them. WTF?
If you wanna talk about dissappearing when somethign comes up, just realize that since I got back on here and aired out the truth, ROtaryNemesis hasnt made a single post.
The only reason Ive been "disappearing" is because Ive been spending most of my time traveling on trains/buses since this bastard cost me my car. Just read the thread and youll understand.
Last edited by BklynRX7; 03-31-06 at 04:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM
86rxNa
2nd Generation Specific (1986-1992)
2
08-11-15 11:51 AM