2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Fuel Injectors

Thread Tools
 
Search this Thread
 
Old Mar 15, 2004 | 06:29 PM
  #1  
jdonnell's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (1)
 
Joined: Nov 2001
Posts: 940
Likes: 3
From: Cape Canaveral FL
Fuel Injectors

Ok, the search is 'not responding'. Any recommendations for replacement fuel injectors for a 90' Vert. Should I buy Rebuilt or new? Just want stock but don't want to pay the OEM price. Any recommendations, RC Engineering, FuelinjectorsDirect, etc? Thanks...........
Reply
Old Mar 15, 2004 | 06:40 PM
  #2  
WAYNE88N/A's Avatar
Lives on the Forum
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 5,721
Likes: 3
From: Coldspring TX
About the cheapest route is gonna be to buy a used OEM set from somebody & send 'em off to be cleaned & blueprinted. New ones cost $$$
Reply
Old Mar 16, 2004 | 05:08 PM
  #3  
jdonnell's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (1)
 
Joined: Nov 2001
Posts: 940
Likes: 3
From: Cape Canaveral FL
What if there is leakage. I had mine cleaned and that seemed to be the start of my problem. Since then my oil gets diluted with fuel. Are rebuilt injectors ok, or are they a band-aid type fix???
Reply
Old Mar 16, 2004 | 05:43 PM
  #4  
J-Rat's Avatar
Alcohol Fueled!
Tenured Member 20 Years
iTrader: (2)
 
Joined: Jan 2002
Posts: 11,093
Likes: 2
From: Hood River oregon
Depending on who rebuilds the injectors, they should be as good or better then new.

Try www.cruzinperformance.com
Reply
Old Mar 16, 2004 | 06:08 PM
  #5  
Sir Rupert Hobo's Avatar
seven-less
Tenured Member 15 Years
 
Joined: Apr 2003
Posts: 2,082
Likes: 0
From: city of houston.... y0!
cruzin perf. is the shiznit... best price.
Reply
Old Mar 16, 2004 | 06:19 PM
  #6  
Atkins Dan's Avatar
Former Site Sponsor
 
Joined: Aug 2003
Posts: 4,368
Likes: 0
From: Tacoma WA
I have USED fuel injectors for sale $100.00 for a set I just flow tested them today. shipping is $10.00
Dan
Reply
Old Mar 16, 2004 | 07:35 PM
  #7  
jdonnell's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (1)
 
Joined: Nov 2001
Posts: 940
Likes: 3
From: Cape Canaveral FL
Thanks for the posts. I'll investigate rebuilds first and then go from there.
Reply
Old Mar 16, 2004 | 08:02 PM
  #8  
Project84's Avatar
Open up! Search Warrant!
Tenured Member 05 Years
 
Joined: May 2002
Posts: 3,838
Likes: 3
From: Kicking down doors in a neighborhood near you
Originally posted by dan atkins
I have USED fuel injectors for sale $100.00 for a set I just flow tested them today. shipping is $10.00
Dan
Were the dissassembled and clean as well?
Reply
Old Mar 16, 2004 | 08:04 PM
  #9  
YearsOfDecay's Avatar
Locust of the apocalypse
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 2,553
Likes: 2
From: Directly above the center of the earth (York, PA)
Originally posted by jdonnell
What if there is leakage. I had mine cleaned and that seemed to be the start of my problem. Since then my oil gets diluted with fuel. Are rebuilt injectors ok, or are they a band-aid type fix???
THAT.. doesn't sound like an injector problem.... THAT sounds like an oil control ring problem.
Reply
Old Mar 18, 2004 | 06:32 PM
  #10  
jdonnell's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (1)
 
Joined: Nov 2001
Posts: 940
Likes: 3
From: Cape Canaveral FL
I cant remember if they were diassembled when cleaned. I just sent them to RC Engr for cleaning but I'm not sure what they did-cant remember because it was about a year ago? I did replace the o-rings when I re-installed them. I probably screwed up the install?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
EfiniGirl
Haltech Forum
2
Sep 1, 2015 09:31 PM
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM




All times are GMT -5. The time now is 10:17 PM.