RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Fuel Injectors (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/fuel-injectors-283154/)

jdonnell 03-15-04 06:29 PM

Fuel Injectors
 
Ok, the search is 'not responding'. Any recommendations for replacement fuel injectors for a 90' Vert. Should I buy Rebuilt or new? Just want stock but don't want to pay the OEM price. Any recommendations, RC Engineering, FuelinjectorsDirect, etc? Thanks...........

WAYNE88N/A 03-15-04 06:40 PM

About the cheapest route is gonna be to buy a used OEM set from somebody & send 'em off to be cleaned & blueprinted. New ones cost $$$

jdonnell 03-16-04 05:08 PM

What if there is leakage. I had mine cleaned and that seemed to be the start of my problem. Since then my oil gets diluted with fuel. Are rebuilt injectors ok, or are they a band-aid type fix???

J-Rat 03-16-04 05:43 PM

Depending on who rebuilds the injectors, they should be as good or better then new.

Try www.cruzinperformance.com

Sir Rupert Hobo 03-16-04 06:08 PM

cruzin perf. is the shiznit... best price.

Atkins Dan 03-16-04 06:19 PM

I have USED fuel injectors for sale $100.00 for a set I just flow tested them today. shipping is $10.00
Dan

jdonnell 03-16-04 07:35 PM

Thanks for the posts. I'll investigate rebuilds first and then go from there.

Project84 03-16-04 08:02 PM


Originally posted by dan atkins
I have USED fuel injectors for sale $100.00 for a set I just flow tested them today. shipping is $10.00
Dan

Were the dissassembled and clean as well?

YearsOfDecay 03-16-04 08:04 PM


Originally posted by jdonnell
What if there is leakage. I had mine cleaned and that seemed to be the start of my problem. Since then my oil gets diluted with fuel. Are rebuilt injectors ok, or are they a band-aid type fix???
THAT.. doesn't sound like an injector problem.... THAT sounds like an oil control ring problem.

jdonnell 03-18-04 06:32 PM

I cant remember if they were diassembled when cleaned. I just sent them to RC Engr for cleaning but I'm not sure what they did-cant remember because it was about a year ago? I did replace the o-rings when I re-installed them. I probably screwed up the install?


All times are GMT -5. The time now is 12:53 PM.


© 2024 MH Sub I, LLC dba Internet Brands