Well, As a fix to my flooding issue, Im installing the fuel cut switch that was put in but never hooked up. The problem is, im not sure which wire to tap into. Posting up a couple of pics of them if anyone could point the right one out for me. Sorry they are blurry, the camera sucks, it was dark, and it was raining. I might try and get a better one tomorrow if need be. Thanks

 

According to http://www.rotaryresurrection.com/ro.../flooding.html it would be the middle wire.

-=Russ=-

 

I concur- the middle one.

Don't hack it too close to the connector, in case you ever want to remove the fuel cut switch and resplice the OEM wiring...

 

The brownish one right in the lower middle? I just noticed that there was no "black with a white stripe" so just making sure before i start going to town with a wire cutter.

 

What year is your car? All I see is RX-8 in your profile. I'll go get the schematics if you have an S4, but I'm pretty sure it was black/white...

 

Make sure you outfit them with quick disconnects in the event you ever want to move or replace your switch. Just FYI

 

Yes, its a 88 turbo ii.

 

The middle black/white wire.

 

https://www.rx7club.com/2nd-generation-specific-1986-1992-17/my-fuel-cut-switch-write-up-pictures-343361/