I need to know the largest Size sway bar that is on an FC.

Reason: the Swap I got call for a BMW E36 bar and the sway bar is like 24,25mm.
I need to get it to fit without creating new mounts.
The old FC brackets/bushings are too small and the New Bushings/brackets are a little too big.
The bolt holes from the E36 do not line up correctly.

Any Suggestions?.
Thanks as usual Guys.
STYX.

 

Convertible has largest factory bars

 

good to know..but what size would that be?

 

The racing beat front sway bar measures 28.5 mm(1.125") maybe just order one of their front sway bars and bushing kit?

 

stock "HD" sway bars (vert, GXL, turbo) are 24mm in the front.

you can get aftermarket poly bushings that fit in the stock brackets pretty easily.

J-AUTO - Bushings, Suspension, Parts for Mazdas sells them he can probably get superpro or whiteline bushings, they both make them.

 

Yep, just buy the Energy Suspensions universal sway bar bracket and the appropriate sized poly bushing. The Autozone near me sells a pretty good range of sizes. Just measure your bar.

 

pretty sure the base S4's are 22mm fronts and everything else is 24mm.

 

Ya I got the 22mm for sure..it was tiny compared to the other bar.
I mocked the bar up by using my trusty Dremel to hone the FC bushings and bracket's holes to fit the bigger bar.

I'm running into some issues that I have to figure out,so this Info on size is good to know.

I'll post in my Build thread later about what I was faced with and how I tackled it.
It's a non Rotary engine install problem so I won't post it in this Specific section.