Im a bit confused.... Where is the white mark at on the top shock mount?

According to the fsm there should be alittle white dot that faces the front inside corner of the mount, but the shock mounts i have don't have alittle white dot there.

I see that in the picture that they provide for you shows a natch on the outer part of the shock mounts.

Would someone please clear this up for me, thanks.

 

the white falls off, but there is a little raised nubbin. or you can just look at it. if you really look at it, its pretty clear the strut isn't centered in the mounting block

 

Ok I seen the little nubs. I'm pretty sure its set right.
I look at a front clip I have, they still have the shocks in place from the factory.
Thanks man ^.

 

did you figure this out..looks like i am now running into a ver that someone spun all the mounts and the alignment shop cant find proper camber.

 

there are only 2 choices for camber....