They were off of a turboII. im wondering if they would work or even fit on an 87 NA with any of the other racing beat parts or if i will have to fab something OR if they will work well with the car at all.

heres some pics of em if it helps.

 

Great find!

 

I'm sure any knowledgable car-shop can take care of it for a reasonable price.

Its primarily a flange or two thats needed :O!

 

oh yeah forgot to mention all i have is a presilencer with everything else on the exhaust stock.

 

well they should just bolt up to the 'Y' pipe....correct me if im wrong, but isnt the t2 setup the same at the y pipe?

 

Those are the old 80MM exhaust mufflers. They will only fir other 80mm systems

 

should be able to adapt something, but if you dont want em, how much do you want for em???

 

They will work fine with an N/A car. But you will need to have a y-pipe fabed up, as i don't know if the vintage style TII 3" exhaust components will work with the newer 3" system they currently sell. Even if the new TII complete system y-pipe would bolt and work with those mufflers, it wont bolt to a stock cat. (different flange sizes).

Just have a shop fab something up. Racing beat should be able to send you just the flanges. I know they have the large one (forward of the Y) for people whom want to have a universal custom converter fabed in. They likely can get you the smaller muffler flanges too. Then a little bending and welding and you have a Y-pipe that will work.

 

Anyway to check them to see if they're good? Did you pull them from another Rx7? Or just find them by chance? If you just found them there would have to be a reason the owner junked them.