2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Ford Guy Looking For Answers

Old Jun 2, 2004 | 11:52 AM
  #1  
spdfrk50's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: May 2004
Posts: 36
Likes: 0
From: Meridian,MS
Ford Guy Looking For Answers

new to the rotary game.Bought my brothers 88 n/a for $500 and starting to start fixing on the car.Bodys pretty straight and needs paint.Motor runs fine,trannys 5th gear syncro out of whack but livable.Uknown milage on engine.Varios interior pieces(center console,storage doors,etc)missing.Alredy found where to get parts and know about mods such as K&N and exaust(it has single pipe w one cat and a turbo(yak!)muffler).Searched under mods and there are way to many to go to each one of them to get what I'm after.besides the obvios mods from above,what can be done to improve performance,such as injectors,fuel managment,ignition,Pulleys etc.Trying to stay n/a so turbo is out....Thanks all
Reply
Old Jun 2, 2004 | 12:16 PM
  #2  
spdfrk50's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: May 2004
Posts: 36
Likes: 0
From: Meridian,MS
what?no words of wisdom.
Reply
Old Jun 2, 2004 | 12:20 PM
  #3  
nonameo's Avatar
**-P I drive a miata.
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 1,600
Likes: 0
From: albany, GA
port that sum'beech

then tuned collected -> duals
Reply
Old Jun 2, 2004 | 12:29 PM
  #4  
SureShot's Avatar
Seduced by the DARK SIDE
Tenured Member 15 Years
 
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
The magic words - let it breathe & loose weight.
Reply
Old Jun 2, 2004 | 01:15 PM
  #5  
SDrotary-FC's Avatar
@ pipnorcali
Tenured Member 15 Years
 
Joined: Jan 2004
Posts: 2,751
Likes: 2
From: Grass valley, ca
check over at www.teamfc3s.com there is a guy running 13's on his n/a
Reply
Old Jun 2, 2004 | 01:21 PM
  #6  
Rxmfn7's Avatar
Do a barrel roll!
Tenured Member 20 Years
iTrader: (4)
 
Joined: Oct 2001
Posts: 7,529
Likes: 2
From: Lower Burrell, PA
5th gear and reverse doesn't have a syncho on that year , so you dont need to worry about that. As for mods, check this out:

https://www.rx7club.com/showthread.p...threadid=31410
Reply
Old Jun 2, 2004 | 02:07 PM
  #7  
NA2TurboProject's Avatar
Full Member
Tenured Member 05 Years
 
Joined: May 2004
Posts: 115
Likes: 0
From: (Mira Mesa)San Diego, CA U.S.A.
NOS
Reply
Old Jun 2, 2004 | 03:11 PM
  #8  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
First post: 06-02-04 12:52 PM
Second post: 06-02-04 01:16 PM

God forbid someone takes 24 minutes to answer. Especially when this is all in the FAQ at the top of this forum.
Reply
Old Jun 2, 2004 | 09:38 PM
  #9  
spdfrk50's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: May 2004
Posts: 36
Likes: 0
From: Meridian,MS
Jeez,sorry I was at work and didnt pay attention at the time.Anyway thanks for the thread RXmfn7...just what I needed!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tylerx7fb
1st Generation Specific (1979-1985)
39
May 27, 2019 12:45 PM
Clacor
Single Turbo RX-7's
0
Aug 14, 2015 09:17 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:02 PM.