2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Fog lights

Thread Tools
 
Search this Thread
 
Old 08-24-06, 11:51 AM
  #1  
BRAP BRAP BRAP

Thread Starter
 
nopistonsPWR's Avatar
 
Join Date: Aug 2005
Location: Columbus,OH!O
Posts: 186
Likes: 0
Received 0 Likes on 0 Posts
Fog lights

i have an 89 na gtu and it doesnt come stock with a fog lihgt. so i got the fog light and the switch for it and some reason, it wouldn't work. i also check the fuse and the bulbs. doesn't look like anything was wrong with that. so any suggestion on what should i do to check it?
Old 08-24-06, 01:35 PM
  #2  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
are the bulbs good???

and your bump was deleted. Bumps are forbidden here in the 2nd gen technical section.

And a bump after only a half hour kinda makes you look like a spoiled child, that thinks your question is more important than anyone elses.
Old 08-24-06, 02:52 PM
  #3  
Military Rotary Guru!!!


iTrader: (13)
 
zionfarm's Avatar
 
Join Date: May 2006
Location: Woodbridge VA / St.Croix U.S.V.I
Posts: 531
Received 2 Likes on 1 Post
question

what is a Bump
Old 08-24-06, 03:07 PM
  #4  
Shoulder Devil

 
contactsysadm's Avatar
 
Join Date: Jul 2006
Location: New Brunswick, NJ
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
Is the switch good? Maybe the contacts need to be cleaned?

Bump=
http://www.urbandictionary.com/define.php?term=bump
Old 08-24-06, 05:58 PM
  #5  
Still has an RX7.

iTrader: (1)
 
Enthu's Avatar
 
Join Date: May 2001
Location: minneapolis MN
Posts: 1,014
Received 5 Likes on 5 Posts
Probably bulbs, but I had 2 wires that were corroded (they had all that blue dusty crap around them) and had been severed by corrosion. The other fog light I had trouble with once was a bulb out.

You should grab power tester and see if there is voltage at the plug on the switch half of it. If not, then you at least know where to begin.
Old 08-24-06, 06:54 PM
  #6  
Dak
Information Regurgitator

 
Dak's Avatar
 
Join Date: Feb 2001
Location: Sparta TN. United States
Posts: 1,893
Received 172 Likes on 129 Posts
Along with not having the fog lights or the switch, my GTUs was also missing the relay. The switch controls the relay which applies the power to the lights. There were three relays on my car to start with.They are located just behind where the nose and hood meet. If there are 4 there make sure they're all plugged in. If only three that may be your problem. Also automatics have a relay for the aux. fan but I think they also have fog lights so they would have 5 as do the Turbo II as it also has the aux. fan. I don't know if this applies to series 4 cars but since yours is an '89 it should be tha same.
Old 08-24-06, 09:35 PM
  #7  
BRAP BRAP BRAP

Thread Starter
 
nopistonsPWR's Avatar
 
Join Date: Aug 2005
Location: Columbus,OH!O
Posts: 186
Likes: 0
Received 0 Likes on 0 Posts
yeah ima bout to check the voltage of the wire and see if it got some pwer running through. thanks alot ima keep it in mind
Old 09-06-06, 03:45 AM
  #8  
Senior Member

 
wiL87's Avatar
 
Join Date: Oct 2005
Location: norcal
Posts: 529
Likes: 0
Received 0 Likes on 0 Posts
noob here. sorry to bring this back up again but I have a 91 coupe that didn't come with foglights. I also plugged everything in (foglights and switch) and still haven't really put in time to making it work. I found this thread

https://www.rx7club.com/showthread.p...hlight=OEM+Fog

where they talked about putting in a relay.
If you just take the relay off of another rx7 with the foglights does it plug right up? or is that not how the relay works? If it does just plug up will it work after and is there a harness that goes into the relay?
Old 09-06-06, 04:22 AM
  #9  
Senior Member

 
wiL87's Avatar
 
Join Date: Oct 2005
Location: norcal
Posts: 529
Likes: 0
Received 0 Likes on 0 Posts
nvm i think i found a post that answered my question ^
Old 09-07-06, 06:17 PM
  #10  
Dak
Information Regurgitator

 
Dak's Avatar
 
Join Date: Feb 2001
Location: Sparta TN. United States
Posts: 1,893
Received 172 Likes on 129 Posts
I didn't read the post above but a brief scan through. I used the factory relay out of the car I got my fog lights from. The plug is there that goes to the relay they just left the relay out on non fog light equipped cars.
Old 09-07-06, 08:08 PM
  #11  
Senior Member

 
daten's Avatar
 
Join Date: Mar 2005
Location: Round Hill, VA
Posts: 735
Likes: 0
Received 1 Like on 1 Post
When I put factory fog lights in my GTU, I ran into the same problem, searched the forums, found out I was missing a relay, pulled the relay off the car I got the fog lights from, put it in the GTU, plugged it into the matching plug on already on the harness and it all worked fine.

Also, they only work when your headlights are on.
Old 12-23-06, 10:56 AM
  #12  
Military Rotary Guru!!!


iTrader: (13)
 
zionfarm's Avatar
 
Join Date: May 2006
Location: Woodbridge VA / St.Croix U.S.V.I
Posts: 531
Received 2 Likes on 1 Post
Is the plug green that goes to the fog light.
Old 12-23-06, 01:39 PM
  #13  
Dak
Information Regurgitator

 
Dak's Avatar
 
Join Date: Feb 2001
Location: Sparta TN. United States
Posts: 1,893
Received 172 Likes on 129 Posts
If you mean the plug that plugs into the relay. Yes. At least it is on my '89.
Old 12-23-06, 01:49 PM
  #14  
Winter sucks

 
micah's Avatar
 
Join Date: Jan 2004
Location: Newberg, Oregon
Posts: 3,083
Likes: 0
Received 0 Likes on 0 Posts
http://www.rotorwiki.com/index.php/S...Fog_Light_Swap

Edit: The write-up isn't complete as I'm still waiting for the fog-lights themselves to get through the holiday rush... UPS = teh suck. But the rest should be accurate.
Old 12-23-06, 05:56 PM
  #15  
Military Rotary Guru!!!


iTrader: (13)
 
zionfarm's Avatar
 
Join Date: May 2006
Location: Woodbridge VA / St.Croix U.S.V.I
Posts: 531
Received 2 Likes on 1 Post
Originally Posted by micaheli
http://www.rotorwiki.com/index.php/S...Fog_Light_Swap

Edit: The write-up isn't complete as I'm still waiting for the fog-lights themselves to get through the holiday rush... UPS = teh suck. But the rest should be accurate.
Thanks alot micaheli i found the green relay plug in just waiting on the fog lighs to come in from ebay. In the pic r those the metal brackets they come with

http://cgi.ebay.com/ebaymotors/ws/eB...3825447&rd=1,1
Old 12-23-06, 06:44 PM
  #16  
Winter sucks

 
micah's Avatar
 
Join Date: Jan 2004
Location: Newberg, Oregon
Posts: 3,083
Likes: 0
Received 0 Likes on 0 Posts
I'm waiting for my set to come in from ebay as well. And yes.. You are getting the following:

*Fog Lights
*Fog light brackets
*Wiring Pigtails

You will not however be getting the fog light surrounds/ducting which, IMO adds to the clean factory look of the fog lights...

Here's an example (the auction I won. hehe)

http://cgi.ebay.com/ebaymotors/ws/eB...m=220061344671
Old 12-23-06, 06:45 PM
  #17  
Winter sucks

 
micah's Avatar
 
Join Date: Jan 2004
Location: Newberg, Oregon
Posts: 3,083
Likes: 0
Received 0 Likes on 0 Posts
Oh, also, did you get the relay for the green connector? I might have a spare if you need it.
Old 12-23-06, 06:55 PM
  #18  
Military Rotary Guru!!!


iTrader: (13)
 
zionfarm's Avatar
 
Join Date: May 2006
Location: Woodbridge VA / St.Croix U.S.V.I
Posts: 531
Received 2 Likes on 1 Post
My FC came with the surround/ducting, Yes i got the relays allready.

Thx micaheli
Old 12-23-06, 07:05 PM
  #19  
Winter sucks

 
micah's Avatar
 
Join Date: Jan 2004
Location: Newberg, Oregon
Posts: 3,083
Likes: 0
Received 0 Likes on 0 Posts
Oh.. right on then... Didn't know if you were equipping a base model.
Old 12-23-06, 09:10 PM
  #20  
Military Rotary Guru!!!


iTrader: (13)
 
zionfarm's Avatar
 
Join Date: May 2006
Location: Woodbridge VA / St.Croix U.S.V.I
Posts: 531
Received 2 Likes on 1 Post
no biggy i have a GXL, it came with the fog switch allready and the ducts but i got it with no fog lights. My guess is it wuz a dealership add on. Or previous owner took them off.
Old 12-23-06, 09:43 PM
  #21  
Winter sucks

 
micah's Avatar
 
Join Date: Jan 2004
Location: Newberg, Oregon
Posts: 3,083
Likes: 0
Received 0 Likes on 0 Posts
Previous owner probably took them out to replace the bulbs, or blew a bulb and couldn't afford to replace them. so he removed the lights...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JoesFC
2nd Generation Specific (1986-1992)
9
10-05-15 08:10 AM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM



Quick Reply: Fog lights



All times are GMT -5. The time now is 11:32 PM.