Im using the stock secondary fuel rail for my 1600's. I have my AN fitting for the supply side, which is a -6 to m14x 1.5. Problem, the O-ring is very small on the tip, and does nothing once in the rail. Do I need one of those washers with the built in oring for this fitting? Or do i have the wrong fitting? I followed fc3spro.com part number for this part.

Here is the AN fitting with the small oring
http://i22.photobucket.com/albums/b3...C/-6to14x1.jpg

Is this the type of Oring needed for the fitting
http://static.summitracing.com/globa...78004erl_w.jpg

 

Yeah, it's a power steering fitting, and you can remove the small o-ring at the tip.
You do need a crush washer to mate it with the stock fuel rail.


-Ted

 

Thanks Ted