fiberglass doors :)
NorCal 7's Co-founder
Joined: Aug 2002
Posts: 4,130
Likes: 5
From: Rocklin, CA
Panspeed or RE Amemiya are the only two places I know of. But I hope you have a couple thousand dollars laying around plus another thousand for shipping. www.takakaira.com might be a good place to start looking. But you are searching for parts that are very very hard to get a hold of! Best of luck bro.
Full Member
Joined: May 2006
Posts: 89
Likes: 0
From: Cali
About the lexan, check out the speedglass windows at http://grannysspeedshop.com/
They have some protective coating on them and will save 45 lbs for both the front and rear windows each. Keep in mind you cant break them, so in an accident they can be dangerous.
They have some protective coating on them and will save 45 lbs for both the front and rear windows each. Keep in mind you cant break them, so in an accident they can be dangerous.
NorCal 7's Co-founder
Joined: Aug 2002
Posts: 4,130
Likes: 5
From: Rocklin, CA
And if you do find the fiberglass doors, I'd be curious to see what the actual cost of them is. If you want them bad enough I'm sure that there is a company on this forum that could/would make them. 
Full Member
Joined: May 2006
Posts: 89
Likes: 0
From: Cali
Originally Posted by blacks5
About the lexan, check out the speedglass windows at http://grannysspeedshop.com/
They have some protective coating on them and will save 45 lbs for both the front and rear windows each. Keep in mind you cant break them, so in an accident they can be dangerous.
They have some protective coating on them and will save 45 lbs for both the front and rear windows each. Keep in mind you cant break them, so in an accident they can be dangerous.
I'm back Bishes
Joined: Jan 2006
Posts: 1,241
Likes: 0
From: Rhode Island
I once saw a set sell on ebay many years ago located in puerto rico. It consisted of a hood fenders and door panels. Set sold for cheap too! Can't remember how much but it was less than 500.00
Trending Topics
5one5innovations.com
Joined: Feb 2004
Posts: 297
Likes: 0
From: Toronto Ont.
lol
Originally Posted by robtechfabrications
5one5 should make fiberglass doors...with clearance for door bars on a cage...i have some cool ideas we'll hafta discuss over poker
lol one guy one guy many projects
Thanks Mael
Full Member
Joined: May 2006
Posts: 89
Likes: 0
From: Cali
Originally Posted by BLUE TII
You can get the Mazda factory race IMSA, GTS etc 2nd gen fiberglass doors (and rest of body parts) pretty cheap from MazdaComp, but you probably need a tube frame to mount them on
Last edited by blacks5; Jun 15, 2006 at 03:06 PM.
NorCal 7's Co-founder
Joined: Aug 2002
Posts: 4,130
Likes: 5
From: Rocklin, CA
And not to sound like an old bastard here but, unless you have a full roll cage with side bars then you SHOULD NOT put fiberglass doors on your car. That is just damned dangerous and an overall stupid thing to do.
There are so many things to do before putting fiberglass doors on your car.
Are you racing in a class? Do they have minimum weight requirements? What kind of racing are you trying to do?
Are you racing in a class? Do they have minimum weight requirements? What kind of racing are you trying to do?
Thread
Thread Starter
Forum
Replies
Last Post
