Anyone know who makes replica or have a good price on FEED front lip? I plan to get it in like a month or two.

 

PM Wormiez. He used to sell them, and may still have a few left.

 

If you go with wormiez replica feed lip, make sure that the new shop he is using is making the lip much thicker than his first few batches. Mine was broken during shipping and honestly it looked like you could crack it by looking at it . I then went with one of mikeL's replica demonspeed lips for slightly over 1/2 the price of the feed replica and it looked about 10x as durable.

 

thanks guys. Anyone know who elses makes it other than wormiez?

 

Man I was really liking that FEED lip until somebody pointed out how when you looked at the profile of the car the lip is below the lowest point on the car.

James

 

If you guys are looking for front lips, I'd suggest you ask the width of the spoiler. The one I bought from Panspeed in Japan is 2.5 inches wide which means the front will be 2.5 inches lower. I'm wondering how long this one will last. Ack, oh well. 17" and proper tire should raise it about .5 in.
The few who are selling replicas are about 2- 3 inches wide which will make driving up and down driveways tricky.

 

http://www.nopistons.com/forums/inde...howtopic=47604

 

www.i-m-racing.com

if i remember correct they have them

 

Yup, but that is fibreglass and it's 255 bucks. This one (rotaryextreme version) is made from urethane, same material as the stock front bumper which doesn't crack when you have an OOOPPPS incident. Urethane costs a lot more since material costs are high and it's harder to work with than fibreglass. The mold is also a bit more complicated. That and this one is 195.

 

NOT A FANof feed lips....it's missing something.....MazdaSpeed is the way to go.

 

195 with 60 people!!! I have to say I like the mazdaspeed better too

-Mike

 

Let me know what you find, because I always wanted one but settled for the OEM turbo lip because I couldn't find one for less than $500.

-Andrew

 

OEM turbo lip owns all imho. looks very proper the drop in the front. actually the panspeed is pretty good too...

 

never seen the panspeed and I don't like the Stock TII lip...it looks cool but it's not an A-Spec lip.....
Fiancee's GTUs with TII lip and It also has TII sideskirts from the car BELOW(when I crashed it):


My old TII with MazdaSpeed A-Spec Front lip

 

ooooooo baby. Yes ma'am my White 89 t2 will look perfect with that mazdaspeed lip

 

I will always love the A-Spec lip......now to get my new GTUs Turbo to look like my old red TII

 

illl be making a lip here very shortly...something similar to the feed leep but not a replica...prolly around 159 for each. I might also do them in CF for around 250

 

Hey Madrx7racer...where can you find that Mazdaspeed lip? Real or not I cant seem to find one.

 

www.corksport.com

 

^^^
CORK SPORT 'Type MS' Front Lip Spoiler (89-91)
This piece is a direct replica of the Mazdaspeed front lip. Constructed of high quality hand laid fiberglass. Fits S5 model (89-92).

What pisses me off is that I HAD the real MS lip......on a drive in the mountains my front end bottomed out and loosened it......once out of the mountains I hit Hwy. 1 and when I with 110 it broke and I ran over it........When I got out after my drive I saw my front end and was like....."hmmmmmm it looks weird......NOOOOOOOOOOOOOOOOOOOOOOOOOOO!"

 

any more pics of the mazdaspeed lip...



gil

 

this thread is old. i actually own rookie84's car now.

 

Whoa, I'd rock that MS duplicate lip, for track use only. I'd wreck it on the street for sure.

 

it's hard to find more pics.....

 

Actually interestingly enough there is a group buy going on at NoPistons for Feed Replica lips, the price is 195$

http://www.nopistons.com/forums/inde...howtopic=47604

We just need about 50 more people to jump on .

BTW they are polyurethane not some crappy breakable fiberglass.

--Fritz