Fd Uim Into Fc?
01-25-09, 07:51 PM
#1
Fd Uim Into Fc?
So ive been searching for couple weeks bout this mod, and cannot seem to find any real useful info on it. I know you have to port match , and run s5 T2 lim, but what parts do i need to swap from my s4 tb to the new fd tb?
There is couple of sensors that are on the fc tb and i wasntsure what needs to be transferd. Do i use my fc tps or do i have to search for a fd tps?
My fc has no rats nest,ac,ps and I was also wondering if i wud need to use any kind of block off plates besides the ones for the fc... What do i need to cap off on the jdm (no aws) fd uim?
Does anyone have a write up on this or what?
There is couple of sensors that are on the fc tb and i wasntsure what needs to be transferd. Do i use my fc tps or do i have to search for a fd tps?
My fc has no rats nest,ac,ps and I was also wondering if i wud need to use any kind of block off plates besides the ones for the fc... What do i need to cap off on the jdm (no aws) fd uim?
Does anyone have a write up on this or what?
01-26-09, 04:47 PM
#3
Inexperienced Tinkerer
Join Date: Mar 2007
Location: Sanford, NC
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
perhaps there are no responses because while there are no technical write-ups for it, there has been a plethora of discussion and, most of the time, turned into a project that maybe a handful of people have followed through with, and mainly for cosmetic purposes.
...of course, i could be wrong...
...of course, i could be wrong...
Thread
Thread Starter
Forum
Replies
Last Post
