zeromage428

A friend and I are picking up an almost complete interior for an FD

the plan is to put it into the FC...i think weve all seen it done before but i just have a question

to get the FD gauge cluster to work with an S4...what do i need to do?

i had rewired the S5 cluster to work...now to go S6

RETed

No.


-Ted

DrKillJoY

TurboII RudeBoy

i did the fd gauges in my s5 .the oil pressure , temp and fuel all work just 12v signal and ground, you have to cut them apart and find a way to adhere them to your cluster i used epoxy. the tach is the same. the speedo i haven't gotten to work yet so i put a nice digital led speedo in the stock speedo circle with a carbon fiber trim piece to fill up the rest of the circle. i'll try to post a pik later. you have to also get a way to light them up , i used led red bulbs and made a christmas tree like series that runs behind the gauges. its possible alot of work for no real accuracy it's just a visual thing. hope you have supporting gauges and don't look towards the fd stuff for any real feed back.but it looks nice.o by the way i didn't see your using the whole fd cluster for that just follow the pinouts.

arghx

iTrader: (3)

it's hard enough to keep an FD interior from shattering to pieces in an actual FD...

stylEmon

iTrader: (2)

there is a guy in the non-tech section who somehow fit the entire FD interior into an FC... it looked really nice.