FCD, How to know?
Thread Starter
Full Member
Joined: Apr 2004
Posts: 57
Likes: 0
From: Dominican Republic
FCD, How to know?
Hi guys!
Sorry for the dumb question, I searched around but didn't find any answer, so here I am...: How do I know if my FC has a FCD installed?
I can see that the vacum line to the pressure sensor is actually disconected, how will this affect the ECU?
I'm on my 3rd week with my FC and still have a loooong way to learn...
Best Regards
Sorry for the dumb question, I searched around but didn't find any answer, so here I am...: How do I know if my FC has a FCD installed?
I can see that the vacum line to the pressure sensor is actually disconected, how will this affect the ECU?
I'm on my 3rd week with my FC and still have a loooong way to learn...
Best Regards
Locust of the apocalypse
Joined: Apr 2003
Posts: 2,553
Likes: 2
From: Directly above the center of the earth (York, PA)
There will be a box wired wired in line between the pressure sensor and the wiring harness.
Its more important on a Turbo thatn an N/A but you still nheed to hook it up
Its more important on a Turbo thatn an N/A but you still nheed to hook it up
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
It could also be wired at the ECU. Might be homemade, might be commercial, but it won't look factory. BTW, reconnect the pressure sensor line immediately. Without it, the ECU has no idea how much boost you are running. Timing is effected by this sensor.
Thread
Thread Starter
Forum
Replies
Last Post
Devon300zx
2nd Generation Specific (1986-1992)
3
Sep 17, 2015 03:50 PM
Devon300zx
2nd Generation Specific (1986-1992)
13
Sep 2, 2015 08:16 AM
Snook
3rd Generation Specific (1993-2002)
21
Sep 1, 2015 06:32 PM