FC3S.org please respond jspec engines
03-26-02, 08:21 PM
#26
Full Member
Thread Starter
Join Date: Mar 2002
Location: Indiana
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
no but, i JUST bought the TII and i would have liked to take it =) its kind of a pain in the *** to buy a car and 1 day later have it kick you in your ***... if this were a perfect world i could make it work... but if it were a perfect world i wouldnt have a broke down car either.... i guess i'm over it now, I was just mad for a couple of days.... *shrug* $2100 is nothin right?
03-26-02, 08:29 PM
#28
Full Member
Thread Starter
Join Date: Mar 2002
Location: Indiana
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: Sorry Sorry
Originally posted by MIKE-P-28
Where are you in southern Indiana, Im about 40 miles south/east of Evansville, IN. When I scoping the yards over there a while back there were quite a few in there, might check an Evansville phone book...
Where are you in southern Indiana, Im about 40 miles south/east of Evansville, IN. When I scoping the yards over there a while back there were quite a few in there, might check an Evansville phone book...
03-26-02, 08:42 PM
#30
OG
Join Date: Mar 2001
Location: Charlotte NC
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sorry Sorry
Originally posted by Rx7supra
Dave - sorry for not realizing this was a side biz, i guess i might need a new fax eh? 4-6 weeks ouch, do you get them first or can you have them drop shipped? if you do get them first do you check them yourself? i need a drop in replacement if there is such a thing, sorry if i was a dick (in your eyes) but it was handled nicley. I hope to do buisness with you soon. If i'm gonna have to put this off i might as wel put something like a 13brew in right? what do i need, computer,motor mounts, uh???? i dunno honestly.
thanks for replying BTW how much do you pay for the engines?
Mike - I'm in southern indiana, but
not for long...
know anyone close with a series 4 13bt
Mazda Dealership wants $6300 to put a remanufactured engine in 1900 for engine 1000 for turbo and 3400 to install GODDAMN
well sorry for acting childish i guess thats that
Dave - sorry for not realizing this was a side biz, i guess i might need a new fax eh? 4-6 weeks ouch, do you get them first or can you have them drop shipped? if you do get them first do you check them yourself? i need a drop in replacement if there is such a thing, sorry if i was a dick (in your eyes) but it was handled nicley. I hope to do buisness with you soon. If i'm gonna have to put this off i might as wel put something like a 13brew in right? what do i need, computer,motor mounts, uh???? i dunno honestly.
thanks for replying BTW how much do you pay for the engines?Mike - I'm in southern indiana, but
not for long... know anyone close with a series 4 13bt
Mazda Dealership wants $6300 to put a remanufactured engine in 1900 for engine 1000 for turbo and 3400 to install GODDAMN
well sorry for acting childish
i guess thats that
No worries man, I understand how it is to have your motor killed. My importer gets them first, so he can inventory them and make sure that everything is ok with them. Then once his inventory is complete (usually one day) then I start to inform people on the waiting list and start to offer them for sale to intersted parties. You could install a 13B-REW but that is a rare engine for us to get since it is hard to find good ones over there to meet our standards. That involves either alot of work using the stock harness and ECU, a PowerFC or the like, or a Haltech etc. more info on that conversion is easily found by doing a search here in the forum.
My prices are confidential
But believe it or not not much less than what we charge. I wouldn't trust the dealer with my car to be honest since they aren't as rotary savvy as they once used to be.
Good luck, and let me know if I can help in any way.
03-26-02, 08:46 PM
#31
Full Member
Thread Starter
Join Date: Mar 2002
Location: Indiana
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
i would put anything you have in stock in my car as long as its not going to include to many mods to the engine bay.. Computer = no problem i can upgrade that you said you had a cosmo??? inform me on that, i can never find anything on that is it twin turbo? i heard its easier to bolt up or same mounts *shrug* i dunno what can you tell me about it?
03-26-02, 09:28 PM
#32
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
you are NOT going to fit anything other then your year/modle engine in in less then 6 days... much less a few months. don't even bother with anything else.
why do you need a new turbo??
why do you need a new turbo??
03-26-02, 10:19 PM
#34
AKA Poindexter
iTrader: (2)
Join Date: Apr 2001
Location: Austin, TX; JABLAM!, WA; Iraq
Posts: 632
Likes: 0
Received 0 Likes
on
0 Posts
Re: What??
Originally posted by Rx7supra
Dude i already knew that... why dont you have you car blow up in your face and be calm jesus chist you all must have so much money you can just go **** off without car.. hey why dont you schofer me around.. And it is possible to put an engine in, in 6 days or less.. if it takes more then your a complete moron.
Dude i already knew that... why dont you have you car blow up in your face and be calm jesus chist you all must have so much money you can just go **** off without car.. hey why dont you schofer me around.. And it is possible to put an engine in, in 6 days or less.. if it takes more then your a complete moron.
1. ANYBODY can swap a motor in a Full 12 hour day
2. there is no way that you will get the motor there in less than 6 days, it will have to be shipped frieght unless you find it local
3. Whats the big rush?
03-27-02, 08:48 AM
#36
OG
Join Date: Mar 2001
Location: Charlotte NC
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Rx7supra
i would put anything you have in stock in my car as long as its not going to include to many mods to the engine bay.. Computer = no problem i can upgrade that you said you had a cosmo??? inform me on that, i can never find anything on that is it twin turbo? i heard its easier to bolt up or same mounts *shrug* i dunno what can you tell me about it?
i would put anything you have in stock in my car as long as its not going to include to many mods to the engine bay.. Computer = no problem i can upgrade that you said you had a cosmo??? inform me on that, i can never find anything on that is it twin turbo? i heard its easier to bolt up or same mounts *shrug* i dunno what can you tell me about it?
03-27-02, 09:14 AM
#37
Full Member
Thread Starter
Join Date: Mar 2002
Location: Indiana
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
do i need 2 intercoolers or one?
So al i need is Motor Mounts from k2rd, haltech e6k, piping, and 1 or two intercoolers? heh Since i n=have to wait anyway gimme about 1-2 months what kinda Horsepower should i be getting with that?
So al i need is Motor Mounts from k2rd, haltech e6k, piping, and 1 or two intercoolers? heh Since i n=have to wait anyway gimme about 1-2 months what kinda Horsepower should i be getting with that?
03-27-02, 12:12 PM
#38
Full Member
Join Date: Sep 2001
Location: Kentucky
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Where in Southern IN
I am in Borden IN. just outside of New Albany, I might be able to help you if the timing is right. Where did you get the price for the motor? I might be able to get you a better price from Craig and Landreth Mazda. The Service/Parts Manager is a friend and we get a Kentuckiana RX-7 Discount(not on motors) and this might help you with some parts you may need. Let me know if I can help. terry@kentuckianarx7club.com
03-27-02, 03:32 PM
#39
Originally posted by Rx7supra
do i need 2 intercoolers or one?
So al i need is Motor Mounts from k2rd, haltech e6k, piping, and 1 or two intercoolers? heh Since i n=have to wait anyway gimme about 1-2 months what kinda Horsepower should i be getting with that?
do i need 2 intercoolers or one?
So al i need is Motor Mounts from k2rd, haltech e6k, piping, and 1 or two intercoolers? heh Since i n=have to wait anyway gimme about 1-2 months what kinda Horsepower should i be getting with that?
You need 1 intercooler, and convert the twins to non seq, dont forget about the lightened flywheel and pilot bearing and seal. These are automatic motors ...
Check this link out for more pictures of the motor I have
https://www.rx7club.com/forum/showth...threadid=61869
Also heres a good page on non seq mod
http://www.scuderiaciriani.com/rx7/n...ntial.html#BOO
Stroll around that page and see what you find out and then let me know
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 01:26 PM
