For a while now I've been making headlight and wiper bushings for the FB to support the community with difficult to find parts. Some of you might or might not know this if you're in the FB community as well.
Recently an Australian member found my post for the FB and asked me if I could make him some bushings for the FC. I did some development on my FC and made him a set. Since the design is done and he was happy with the results, I am sharing it here with the community in case any one is interested. I never look at the FC much as i always saw more aftermarket support for it, but it seems that at least one member was in need of such part.
The bushings are available on eBay via this same user, links not allowed. I do this on my spare time to support the community and keep my projects on the road. I always appreciate the rx7 community great support for the past 12 years of owning RX's.
Thanks.

 

Thanks for helping people keep these cars alive.

 

Here is a picture of the bushings. Will ask the Australian member to send me some pics of his on the mechanism.

 

The member did not manage to get any installed pictures.
I have my wiper mechanism out of the car. Will try and get some pictures, maybe even in motion.
I would like to have some more feedback on them, so if you purchased a set, would appreciate the feedback.
Thanks again.