FC question.... need some pros to respond
#1
Junior Member
Thread Starter
Join Date: Dec 2007
Location: Online
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
FC question.... need some pros to respond
Whats going on. Today i am looking into buying this FC but i have a few questions on it, and want some rotor fanatics advice.. I am looking into buying El Nene's red FC. It is a 550whp FC w/ methenol injection. I was curious if i should do this or not... Well this is his link and all the info and pics are in it. He is asking $8500 for it. He also said that all of the mods are brand new.
Here is the link to his post::
https://www.rx7club.com/showthread.php?t=699442
I am really trying to get into this rotors and i have a buddy that is really good but is out of town so want to get some of the club members thoughts until i can ask him.. I have cash in hand so i need to know if this is a good deal, and wont need to much for me to drop into it.
He said that all the car is missing is the Wiring Harnesses because the ones he has are to short and he needs new 1s so that should cost me about 200 bucks and a Fuel line which shouldnt cost me over 80 dollars. He told me that i would make aprox 500-550whp on this setup..
Is it a good bye or should i pass and keep looking
Thanks to all of the seniors of the rotary family
Here is the link to his post::
https://www.rx7club.com/showthread.php?t=699442
I am really trying to get into this rotors and i have a buddy that is really good but is out of town so want to get some of the club members thoughts until i can ask him.. I have cash in hand so i need to know if this is a good deal, and wont need to much for me to drop into it.
He said that all the car is missing is the Wiring Harnesses because the ones he has are to short and he needs new 1s so that should cost me about 200 bucks and a Fuel line which shouldnt cost me over 80 dollars. He told me that i would make aprox 500-550whp on this setup..
Is it a good bye or should i pass and keep looking
Thanks to all of the seniors of the rotary family
#3
Is he planning to fly?!
Join Date: Feb 2007
Location: Kent, WA
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
It's a good buy, lots of money and hours in it, but there are always more little things than just a fuel line and harness I'm sure. Nothing against the build, but we know how these things go. It's definitely a good start! I say go for it.
#5
Rotary Freak
iTrader: (2)
It's a helluva good deal; I REALLY wished I had the money for that car. I seriously tried to find a way to buy it, myself, but couldn't afford it reasonably.
That said, MAKE SURE you know exactly what you're getting into. Yes, it's pretty. Yes, it has tons of potential to be fast. That said, it WILL need you to spend some time with it. If you think you can finish his project, then go for it! I want to see that car on the road!!
That said, MAKE SURE you know exactly what you're getting into. Yes, it's pretty. Yes, it has tons of potential to be fast. That said, it WILL need you to spend some time with it. If you think you can finish his project, then go for it! I want to see that car on the road!!
#6
Junior Member
Thread Starter
Join Date: Dec 2007
Location: Online
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
nope.. had a 13b street ported 3 gen about 6 months back... pretty nice with a gt35 sitting in the mid 400s.. but this would be much nicer honestly
I think it is a good bye.. But i am going to show my guy this tomorrow and see what he says.. I am taking a guess i am going to have to drop a good $2,000 and change into this car to get it running at 450whp at 18lbs..
I am really hoping cause i want to get a 11 sec FC running around here.. and then when i get the methanol hooked up on high boost with the right fuel setup i should be in mid 500s.. but honestly bro 450whp as of now is good for me on a FC.. im going to see if i can get this guy to take pics tomorrow of what it looks like now.. and ill post on here..
Keep posting what you guys think
I think it is a good bye.. But i am going to show my guy this tomorrow and see what he says.. I am taking a guess i am going to have to drop a good $2,000 and change into this car to get it running at 450whp at 18lbs..
I am really hoping cause i want to get a 11 sec FC running around here.. and then when i get the methanol hooked up on high boost with the right fuel setup i should be in mid 500s.. but honestly bro 450whp as of now is good for me on a FC.. im going to see if i can get this guy to take pics tomorrow of what it looks like now.. and ill post on here..
Keep posting what you guys think
Trending Topics
#9
The Assistant
Join Date: May 2006
Location: Phoenix, AZ
Posts: 878
Likes: 0
Received 0 Likes
on
0 Posts
nope.. had a 13b street ported 3 gen about 6 months back... pretty nice with a gt35 sitting in the mid 400s.. but this would be much nicer honestly
I think it is a good bye.. But i am going to show my guy this tomorrow and see what he says.. I am taking a guess i am going to have to drop a good $2,000 and change into this car to get it running at 450whp at 18lbs..
I am really hoping cause i want to get a 11 sec FC running around here.. and then when i get the methanol hooked up on high boost with the right fuel setup i should be in mid 500s.. but honestly bro 450whp as of now is good for me on a FC.. im going to see if i can get this guy to take pics tomorrow of what it looks like now.. and ill post on here..
Keep posting what you guys think
I think it is a good bye.. But i am going to show my guy this tomorrow and see what he says.. I am taking a guess i am going to have to drop a good $2,000 and change into this car to get it running at 450whp at 18lbs..
I am really hoping cause i want to get a 11 sec FC running around here.. and then when i get the methanol hooked up on high boost with the right fuel setup i should be in mid 500s.. but honestly bro 450whp as of now is good for me on a FC.. im going to see if i can get this guy to take pics tomorrow of what it looks like now.. and ill post on here..
Keep posting what you guys think
#10
Junior Member
Thread Starter
Join Date: Dec 2007
Location: Online
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Alright cool, for some reason it came across as you lookin' to get a start on 7's with this particular car...all I could think is high hp FC + newbie = future thread title "I think I just blew my engine? " Yeah it looks like an amazing deal, but I can't say much I'm still very inexperienced compared to everyone else.
Last edited by cliprun; 12-26-07 at 11:19 PM.
#11
Junior Member
Thread Starter
Join Date: Dec 2007
Location: Online
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
i dont think so.. I talked to this guy and he stated that the current wires were taken to a local shop and they made it even shorter so he cant have this car with the right wires.. He also stated that all the car needs is a full wiring harness and fuel line but of course theres prob a few more things.
#13
Junior Member
Thread Starter
Join Date: Dec 2007
Location: Online
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
=]
#14
i hope this is the one cause if you back off on this FC i might step into it.. and i am liking the build
#17
Junior Member
Thread Starter
Join Date: Dec 2007
Location: Online
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
im going to be truthfully honest.. If i purchase this about a 6 month after i have it up and running i will create a custom kit so i can throw a Turbonetics GTK Serious turbo on it.
Thread
Thread Starter
Forum
Replies
Last Post