FC Pulley kits?
#1
Rotary Enthusiast
Thread Starter
Join Date: Dec 2001
Location: UK
Posts: 1,271
Likes: 0
Received 0 Likes
on
0 Posts
FC Pulley kits?
I have removed my PS and AC and am geting tyred with my Water pump belt screeching every time i give it a foot full.
I would like to get a upgrade kit for it but i am not very clued up, i see there is two diffrent types! there is the duel v belt and the Multi rib belt.
Which is the better set up?,Where do i get one from and would i be able to get hold of the belts at a later date?
Thanks.
I would like to get a upgrade kit for it but i am not very clued up, i see there is two diffrent types! there is the duel v belt and the Multi rib belt.
Which is the better set up?,Where do i get one from and would i be able to get hold of the belts at a later date?
Thanks.
#3
Opinions are like........
Better is multirib belt. It doesn't need as much tension as Vbelt and hasn't a higher surface area and should not slip.
Cheaper is the dual pulley.
Just remember your belt size and any parts store will have it.
http://www.rx7.com/cgi-local/2catalog.cgi?cat=3&part=1
http://www.revolutionrotary.com/pulleys.php
Cheaper is the dual pulley.
Just remember your belt size and any parts store will have it.
http://www.rx7.com/cgi-local/2catalog.cgi?cat=3&part=1
http://www.revolutionrotary.com/pulleys.php
#4
Senior Member
Join Date: Jul 2001
Location: Northern California
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
The belts/pullies with the "ribs" are very cool (look like a supercharger belt on a big block hot rod). Less tension is needed and they dont slip. Best of all, they look really cool! Id put them in my car, but im a poor college student again now that i had to pay for this semester of school.
They are here at www.checkpointmotors.net
Graham
They are here at www.checkpointmotors.net
Graham
#6
In Full Autist Cosplay
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
WOW! Look at the size of the alternator pulley!! That thing must be spinning ridiculously slow!!
I would want a serpentine belt alternator pulley to be about 1/3 of that size!
Is there any way to order just the water pump and main pulley from those guys? Maybe I'll just use a 3rd gen alternator pulley (which is multi-rib serpentine) stock.
I would want a serpentine belt alternator pulley to be about 1/3 of that size!
Is there any way to order just the water pump and main pulley from those guys? Maybe I'll just use a 3rd gen alternator pulley (which is multi-rib serpentine) stock.
#7
Senior Member
Join Date: Oct 2002
Location: San Ramon CA 94583
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
What the monkey-spanking do you mean?
http://www.autonomicperformance.com/
?
I don't see any pulleys.
I'm looking for serpentine/ribbed pulleys for the FC.
?
I don't see any pulleys.
I'm looking for serpentine/ribbed pulleys for the FC.
Trending Topics
#8
Senior Member
Join Date: Jul 2001
Location: Northern California
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
Yeah sorry about that, the site is just getting going. There are 3 sets at the shop, 2 in the display case. Just call Autonomic, they should be able to tell you.
I tried them on my car and it sounded like i had a supercharger on it! Very cool, but very pricey. I dont run them now becuase i have a cat and airpump on again.
I tried them on my car and it sounded like i had a supercharger on it! Very cool, but very pricey. I dont run them now becuase i have a cat and airpump on again.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM